| Fixed in Version | Bug: Bug # | Summary | Tool | Date Fixed |
|---|
| CADconform for MicroStation v8.01.65 | B-20242671 | An error is shown when trying to tear-off a Drafting Menu | Drafting Menu | 31/7/2024 |
| CADconform for MicroStation v8.01.65 | B-20242668 | Fixed problem with toggle tear-off/hide/dropdown not working from menu | Drafting Menu | 31/7/2024 |
| CADconform for MicroStation v8.01.64 | B-20242669 | Problem with matching dimensions with a named style set | Conform; Reporting | 31/7/2024 |
| CADconform for MicroStation v8.01.64 | B-20242667 | Text styles may read scale wrong in reference models with differing working units | Reporting | 16/7/2024 |
| CADconform for MicroStation v8.01.64 | B-20242666 | Watermark replacement text did not work with multiple replacement lines in Connect | Watermarking | 28/6/2024 |
| CADconform for MicroStation v8.01.63 | B-20242662 | The Drafting Menu was docking at strange height | Drafting Menu | 12/4/2024 |
| CADconform for MicroStation v8.01.61 | B-20232657 | Change All might fail if a text component doesn't match the text node header | Conform | 24/10/2023 |
| CADconform for MicroStation v8.01.61 | B-20232656 | Fixed crash when CSV/HTML exporting features with keyins >256 characters. | CSV Importing; HTML Reports | 21/10/2023 |
| CADconform for MicroStation v8.01.61 | B-20232655 | HTML Report may attempt to open before it has been created | HTML Reports | 27/9/2023 |
| CADconform for MicroStation v8.01.61 | B-20232654 | Note frame mismatch should be ignored for non-note dimensions | Conform | 5/9/2023 |
| CADconform for MicroStation v8.01.61 | B-20232653 | Annotation scale may get applied twice to dimensions | Conform | 5/9/2023 |
| CADconform for MicroStation v8.01.61 | B-20232660 | Release notes button was not working | Documentation | 27/11/2023 |
| CADconform for MicroStation v8.01.61 | B-20232659 | ByLevel linestyle may not display correctly if the level is in a DGNLIB file | Feature Table Editor | 24/11/2023 |
| CADconform for MicroStation v8.01.60 | B-20232652 | Importing a TXT/CSV file with an element type column might truncate the database | Feature Table Editor | 21/6/2023 |
| CADconform for MicroStation v8.01.60 | B-20232651 | Possible crash when reading Enter Data Field cells with formatting characters | Conform | 15/6/2023 |
| CADconform for MicroStation v8.01.59 | B-20232650 | Branded databases that are not found may show the active discipline as '*' | Feature Table Mgr | 25/5/2023 |
| CADconform for MicroStation v8.01.58 | B-20232649 | Queuing text placement requires the keyin/command window to open in CE | Drafting Menu | 19/4/2023 |
| CADconform for MicroStation v8.01.57 | B-20232648 | Pasting a feature into an existing group may insert as a sibling rather than a child | Feature Table Editor | 31/3/2023 |
| CADconform for MicroStation v8.01.57 | B-20232647 | Draft-by-selection did not support adding user data attributes | Drafting Menu | 31/3/2023 |
| CADconform for MicroStation v8.01.57 | B-20232646 | Draft-by-selection did not support adding tags | Drafting Menu | 31/3/2023 |
| CADconform for MicroStation v8.01.57 | B-20232645 | Drafting in OpenRoads may cause a spurious 'Drafting of feature cancelled' error to appear | Drafting Menu | 30/3/2023 |
| CADconform for MicroStation v8.01.57 | B-20232644 | The watermark does not show the correct subminor version of MicroStation Connect | Watermarking | 28/3/2023 |
| CADconform for MicroStation v8.01.56 | B-20232643 | Fixed possible crash when rendering the change of a component of a cell | Conform | 13/3/2023 |
| CADconform for MicroStation v8.01.56 | B-20232642 | Conform Change All may affect components of elements that have a conforming parent | Conform | 21/3/2023 |
| CADconform for MicroStation v8.01.56 | B-20232641 | Conform might not step out of the last complex component correctly. | Conform | 21/3/2023 |
| CADconform for MicroStation v8.01.55 | B-20232639 | Custom reporting does not call the command correctly in Connect | Configuration; Conform; Reporting | 15/2/2023 |
| CADconform for MicroStation v8.01.55 | B-20232638 | Naming convention checking may not parse strings with double-quotes properly | Configuration; Conform; Reporting | 13/2/2023 |
| CADconform for MicroStation v8.01.55 | B-20232637 | Fixed possible crash with very long naming convention strings | Configuration; Reporting | 10/2/2023 |
| CADconform for MicroStation v8.01.55 | B-20232636 | Watermarks may invalidate if _CADCONFORM_WILDCARD_TYPE is set to 3 or higher | Configuration | 16/1/2023 |
| CADconform for MicroStation v8.01.55 | B-20232635 | The 'Edit Default Config' button was not working | Configuration | 11/1/2023 |
| CADconform for MicroStation v8.01.55 | B-20222627 | Report names are erroneously including qualifiers after expansion | Configuration; Reporting | 3/2/2023 |
| CADconform for MicroStation v8.01.54 | B-20222634 | Histogram may render line graph incorrectly in Connect | File History | 9/12/2022 |
| CADconform for MicroStation v8.01.54 | B-20222633 | Histogram may cause a crash in V10 when opening a V7 DGN | File History | 9/12/2022 |
| CADconform for MicroStation v8.01.54 | B-20222632 | Branding keyin does not support native file disciplines | Branding | 18/11/2022 |
| CADconform for MicroStation v8.01.53 | B-20222631 | Dimension styles may not apply correctly in Connect | Conform | 17/11/2022 |
| CADconform for MicroStation v8.01.53 | B-20222630 | DQM: Decorative streetlight text scale be wrong when switching models | Drafting Menu | 14/11/2022 |
| CADconform for MicroStation v8.01.53 | B-20222629 | Text node size may not conform correctly if it differs from the components | Conform | 2/11/2022 |
| CADconform for MicroStation v8.01.52 | B-20222626 | Attributes are not automatically written to non-cell elements | Drafting Menu | 25/10/2022 |
| CADconform for MicroStation v8.01.52 | B-20222625 | Wait commands may be cancelled if the Shared Cell toggle is enabled | Drafting Menu | 26/10/2022 |
| CADconform for MicroStation v8.01.51 | B-20222624 | DQM: Copying a feature may cause the wrong attribute and symbology to be written | Drafting Menu | 5/10/2022 |
| CADconform for MicroStation v8.01.51 | B-20222600 | Placing of chained commands might cancel on the first instance in a new DGN | Drafting Menu | 20/6/2022 |
| CADconform for MicroStation v8.01.48 | B-20222623 | Text size may get truncated when switching to a decimal comma Windows locale | Conform; Feature Table Editor; Reporting | 16/9/2022 |
| CADconform for MicroStation v8.01.48 | B-20222622 | Single outreach streetlights may report as double in material list (DQM) | Drafting Menu | 7/9/2022 |
| CADconform for MicroStation v8.01.48 | B-20222620 | Cells drafted by origin now use the active cell scale instead of a scale of 1.0 | Drafting Menu | 6/9/2022 |
| CADconform for MicroStation v8.01.48 | B-20222619 | Chained features may abort chain when drawing scale is applied | Drafting Menu | 6/9/2022 |
| CADconform for MicroStation v8.01.48 | B-20222618 | Text size is now treated the same regardless of whether annotation scale is applied | Conform | 2/9/2022 |
| CADconform for MicroStation v8.01.48 | B-20222617 | Unscaled text may not conform when model annotation scale is defined | Conform | 2/9/2022 |
| CADconform for MicroStation v8.01.48 | B-20222616 | Unused fonts are not automatically mapped and added in Connect | Conform | 1/9/2022 |
| CADconform for MicroStation v8.01.47 | B-20222615 | Text aligned to reference linework may cause watermark invalidation | Watermarking | 24/8/2022 |
| CADconform for MicroStation v8.01.46 | B-20222614 | Locking users by feature table only stores the first entry when using the browser | User Manager | 15/8/2022 |
| CADconform for MicroStation v8.01.45 | B-20222613 | Missing models may show a random string in the Design Report MU/SU label columns | Reporting | 8/8/2022 |
| CADconform for MicroStation v8.01.45 | B-20222612 | Custom reports might not work until the user opens the Advanced Options dialog | Reporting | 2/8/2022 |
| CADconform for MicroStation v8.01.45 | B-20222611 | Fixed possible crash caused by a space in XML custom report names | Reporting | 2/8/2022 |
| CADconform for MicroStation v8.01.45 | B-20222610 | Replacing existing watermarks with anno scale may make scale cell apply twice | Watermarking | 18/7/2022 |
| CADconform for MicroStation v8.01.45 | B-20222609 | Certifying marker cells may cause cell scale issues when annotation scale is applied | Watermarking | 14/7/2022 |
| CADconform for MicroStation v8.01.45 | B-20222608 | Replacing cell Enter Data Fields may not work reliably in Connect | Conform | 14/7/2022 |
| CADconform for MicroStation v8.01.44 | B-20222607 | Invalidating an existing watermark via editing an EDF may cause a crash | Watermarking | 29/6/2022 |
| CADconform for MicroStation v8.01.44 | B-20222602 | Orphaned dropdown features may not display in Drafting Menu listbox | Drafting Menu | 21/6/2022 |
| CADconform for MicroStation v8.01.44 | B-20222601 | Possible crash when reading Enter Data Fields containing C formatting symbols | Conform; Reporting | 21/6/2022 |
| CADconform for MicroStation v8.01.44 | B-20222599 | Attributes may be applied to a copied feature erroneously while drafting | Drafting Menu | 20/6/2022 |
| CADconform for MicroStation v8.01.43 | B-20222598 | Importing feature tables with tag checking defined may not retain data correctly | Feature Table Editor | 15/6/2022 |
| CADconform for MicroStation v8.01.43 | B-20222597 | Exporting to feature tables to HTML opens CSV intermediate files | HTML Reports | 9/6/2022 |
| CADconform for MicroStation v8.01.43 | B-20222596 | Reporting or certifying to a defined scan period searches no elements | Configuration; Reporting; Watermarking | 3/6/2022 |
| CADconform for MicroStation v8.01.43 | B-20222595 | A trailing pipe in a regex match string may cause a correct string to fail | Configuration; Feature Table Editor | 19/5/2022 |
| CADconform for MicroStation v8.01.43 | B-20222594 | Fixed possible crash when importing an existing discipline into a new standard | Configuration | 19/5/2022 |
| CADconform for MicroStation v8.01.43 | B-20222593 | Importing cell libraries fails if not found in active cell search path | Feature Table Editor | 13/5/2022 |
| CADconform for MicroStation v8.01.43 | B-20222592 | Fixed possible crash when importing cells to FTE | Feature Table Editor | 13/5/2022 |
| CADconform for MicroStation v8.01.42 | B-20222591 | Fixed possible crash when setting default feature name on DGNLIB import | Feature Table Editor | 10/5/2022 |
| CADconform for MicroStation v8.01.42 | B-20222590 | Autologin fails when no group has been defined by workspace | Login | 3/5/2022 |
| CADconform for MicroStation v8.01.41 | B-20222589 | Cell selector in single cell mode may display incorrectly on opening | Cell Selector | 22/4/2022 |
| CADconform for MicroStation v8.01.41 | B-20222588 | Feature chains may be ignored if older DICT caches are used | Drafting Menu | 20/4/2022 |
| CADconform for MicroStation v8.01.41 | B-20222587 | Menu option to convert to dropdown works again | Drafting Menu | 12/4/2022 |
| CADconform for MicroStation v8.01.41 | B-20222586 | Dropdown buttons now clear lower previous settings when a higher change is made | Drafting Menu | 12/4/2022 |
| CADconform for MicroStation v8.01.41 | B-20222585 | Chained commands may fail the first time a level is used in a new file | Drafting Menu | 6/4/2022 |
| CADconform for MicroStation v8.01.41 | B-20222584 | Linestyle names containing double-quotes may cause a crash | Feature Table Editor | 4/4/2022 |
| CADconform for MicroStation v8.01.41 | B-20222583 | Conforming when text angle is the only error does not work | Conform | 1/4/2022 |
| CADconform for MicroStation v8.01.40 | B-20222582 | Starting a report now prompts for the user to login if necessary | Cell Selector | 30/3/2022 |
| CADconform for MicroStation v8.01.40 | B-20222581 | Spurious error shown in Cell Selector when a previous cell library cannot be found | Cell Selector | 30/3/2022 |
| CADconform for MicroStation v8.01.40 | B-20222580 | User data attributes may not decode from the FTE correctly | Feature Table Editor | 30/3/2022 |
| CADconform for MicroStation v8.01.39 | B-20222579 | Signature cells & Title Block cells might not parse double-quotes correctly | Configuration; Conform; Reporting | 28/3/2022 |
| CADconform for MicroStation v8.01.39 | B-20222578 | Some commands (such as Preferences) containing multiple double-quotes will not launch | Configuration; Preferences | 18/3/2022 |
| CADconform for MicroStation v8.01.37 | B-20222577 | Automatic client updates should now work without locking the server-client version | Configuration | 17/3/2022 |
| CADconform for MicroStation v8.01.37 | B-20222576 | The draft dialog settings are now automatically retrieved from the settings XML file | Configuration; Drafting Menu | 14/3/2022 |
| CADconform for MicroStation v8.01.37 | B-20222575 | Autologin might fail if user-defined is OFF but enable is ON in config | Configuration | 11/3/2022 |
| CADconform for MicroStation v8.01.36 | B-20222574 | The dropdown button toggles child features instead of setting or clearing the flag | Feature Table Editor | 8/3/2022 |
| CADconform for MicroStation v8.01.36 | B-20222573 | DQM reports do not use segment info in length calculations from urd-cu-id control files | Reporting | 2/3/2022 |
| CADconform for MicroStation v8.01.36 | B-20222572 | Cell library cache creation may loop if the cell library contains double quotes | Conform; Drafting Menu; Reporting | 1/3/2022 |
| CADconform for MicroStation v8.01.34 | B-20212570 | The last Discipline may not be retained properly between sessions | Configuration | 17/11/2021 |
| CADconform for MicroStation v8.01.34 | B-20212569 | Preferences may crash saving a file with multiple commas in a row | Configuration; Preferences | 17/11/2021 |
| CADconform for MicroStation v8.01.33 | B-20212568 | Workspace-defined scan period may not read correctly in Connect | Configuration | 17/11/2021 |
| CADconform for MicroStation v8.01.33 | B-20212567 | Watermarks may erroneously apply both anno scale and drawing scale in MSV10 | Watermarking | 5/11/2021 |
| CADconform for MicroStation v8.01.33 | B-20212566 | Marker cells may be ignored in the master model if reference markers are ignored | Watermarking | 5/11/2021 |
| CADconform for MicroStation v8.01.33 | B-20212565 | Annotation scale may not set drawing scale correctly on startup | Drawing Scale | 28/10/2021 |
| CADconform for MicroStation v8.01.33 | B-20212564 | Placing a marker may cause a spurious error due to cell name string case mismatch | Watermarking | 28/10/2021 |
| CADconform for MicroStation v8.01.33 | B-20212563 | Place marker cell with scale toggle may cause scale to apply twice | Watermarking | 28/10/2021 |
| CADconform for MicroStation v8.01.30 | B-20212558 | The installer may transpose OpenBuildings and OpenBridges for selection | Installer | 2/8/2021 |
| CADconform for MicroStation v8.01.30 | B-20212557 | Conform's Drop / Drop All Elements tool did not support Shared Cells | Conform | 2/8/2021 |
| CADconform for MicroStation v8.01.30 | B-20212556 | Conform's Drop All Elements tool may cause an infinite loop on Shared Cells | Conform | 2/8/2021 |
| CADconform for MicroStation v8.01.30 | B-20212555 | Fixed crash when importing XML settings file for CSV import in Connect | CSV Importing | 18/7/2021 |
| CADconform for MicroStation v8.01.30 | B-20212554 | CSV Export was outputting superfluous carriage returns | CSV Importing | 14/7/2021 |
| CADconform for MicroStation v8.01.30 | B-20212562 | Crash in Connect when creating cell cache of cells with >20 EDFs per text elem | Conform | 22/9/2021 |
| CADconform for MicroStation v8.01.30 | B-20212561 | Password CSV export may create string corruption in Connect Edition | User Manager | 20/8/2021 |
| CADconform for MicroStation v8.01.30 | B-20212560 | Selecting locked disciplines or tables may fail if discipline path is not defined under the server path | User Manager | 20/8/2021 |
| CADconform for MicroStation v8.01.30 | B-20212559 | Cells with tags in Connect may not match cell cache definition | Conform; Reporting | 19/8/2021 |
| CADconform for MicroStation v8.01.29 | B-20212553 | Fixed possible watermark invalidation caused by shared cells between V8i & CE | Reporting; Watermarking | 13/7/2021 |
| CADconform for MicroStation v8.01.29 | B-20212552 | Possible scale range mismatch with ref files with differing working units to master model | Reporting | 14/5/2021 |
| CADconform for MicroStation v8.01.28 | B-20212551 | The info report is empty when exporting to a file-based reporting discipline | API; Batch Processor; Reporting | 14/6/2021 |
| CADconform for MicroStation v8.01.27 | B-20212550 | Missing Standard key-value pair in REPJOB file may cause spurious error message | API; Batch Processor | 14/5/2021 |
| CADconform for MicroStation v8.01.27 | B-20212549 | Re-enabled conforming of custom linestyle scale in Connect | Conform | 13/5/2021 |
| CADconform for MicroStation v8.01.24 | B-20212547 | Cancelling the licence dialog allows users to bypass licensing in Connect | Licensing | 16/4/2021 |
| CADconform for MicroStation v8.01.24 | B-20212546 | Edited Enter Data Fields in Connect may cause cell to differ from library | Conform; Reporting | 13/4/2021 |
| CADconform for MicroStation v8.01.19 | B-20212543 | Fixed spurious error when logging in to a non-branded feature database | Databases | 5/2/2021 |
| CADconform for MicroStation v8.01.19 | B-20212542 | Possible crash when API reporting of an empty DB table | API; Batch Processor; Reporting | 5/2/2021 |
| CADconform for MicroStation v8.01.19 | B-20212541 | Possible crash when certifying models in API without an active DGN | API; Batch Processor | 5/2/2021 |
| CADconform for MicroStation v8.01.18 | B-20212540 | Possible crash when launching batch API in Connect with no active design file | API; Batch Processor | 2/2/2021 |
| CADconform for MicroStation v8.01.18 | B-20212539 | Automatic report export did not create the parent subfolder if it didn't exist | API; Batch Processor | 2/2/2021 |
| CADconform for MicroStation v8.01.16 | B-20212538 | Watermark keyin may not parse whitespace correctly | Preferences; Watermarking | 15/1/2021 |
| CADconform for MicroStation v8.01.15 | B-20202536 | Error when conforming some linear elements with custom linestyles | Configuration | 22/12/2020 |
| CADconform for MicroStation v8.01.14 | B-20202534 | Crash when saving out settings XML file in MicroStation/PowerDraft SS2 or earlier | Configuration | 20/11/2020 |
| CADconform for MicroStation v8.01.14 | B-20202532 | The regular expression testing tool no longer worked in V8i | Feature Table Editor | 17/11/2020 |
| CADconform for MicroStation v8.01.13 | B-20202531 | Configuration files created from active settings are empty | Configuration | 12/11/2020 |
| CADconform for MicroStation v8.01.12 | B-20202530 | Exporting Text or CSV may cause a crash on some datasets | Reporting | 6/11/2020 |
| CADconform for MicroStation v8.01.12 | B-20202529 | Exporting Text or CSV dropped empty values, meaning a variable number of export columns | Reporting | 10/8/2020 |
| CADconform for MicroStation v8.01.12 | B-20202528 | Exporting Text or CSV from the report didn't work for file-based disciplines | Reporting | 10/8/2020 |
| CADconform for MicroStation v8.01.10 | B-20202525 | The keyin to set dimension text size was being stripped out of dimension features | Drafting Menu; Feature Table Editor | 10/8/2020 |
| CADconform for MicroStation v8.01.07 | B-20202524 | Drafting 'Note' features may not set the defined colour or weight | Drafting Menu | 10/8/2020 |
| CADconform for MicroStation v8.01.07 | B-20202523 | Drafting 'Note' features may not allow the text size to scale with active drawing scale | Drafting Menu | 10/8/2020 |
| CADconform for MicroStation v8.01.07 | B-20202522 | Zooming to the reference plot border may give incorrect scale in Connect Edition | Conform; Reporting | 10/8/2020 |
| CADconform for MicroStation v8.01.07 | B-20202521 | Plot borders were not found in V8i if they were contained within cells | Conform; Reporting | 10/8/2020 |
| CADconform for MicroStation v8.01.07 | B-20202519 | The keyin to set the dimension text justification does not work | Drafting Menu | 3/8/2020 |
| CADconform for MicroStation v8.01.07 | B-20202518 | Drafting commands may not execute synchronously in Connect Edition | Drafting Menu | 29/7/2020 |
| CADconform for MicroStation v8.01.07 | B-20202517 | CADconform Cell Selector does not set the Tool Settings window correctly in Connect | Drafting Menu | 29/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202389 | Note leader types were swapped in Connect Edition, curved is now 0 and linear 1 | Drafting Menu; Feature Table Editor | 23/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202387 | Conform may crash if the first error is inside an orphan cell in Connect | Conform | 22/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202386 | Conform may report the header rather than the component as the error | Conform | 22/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202385 | Possible hang when conforming notes in Connect with incorrect lineweights | Conform | 22/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202384 | Possible crash on exit in Connect when the FTE is left open | Feature Table Editor | 21/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202383 | Place cell does not set the Tool Settings window correctly in Connect | Conform | 16/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202382 | The custom scan period settings are not stored in the settings XML file in Connect Edition | Configuration; Conform; Reporting | 10/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202381 | Conforming within a defined scan period may not work reliably | Conform | 10/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202380 | Possible hang in Conform Change All when fixing text elements with no style in Connect | Conform | 9/7/2020 |
| CADconform for MicroStation v8.01.06 | B-20202379 | Possible crash in Connect when fixing erroneous design file or model names | Conform | 9/7/2020 |
| CADconform for MicroStation v8.01.05 | B-20202375 | Conform-by-report may miss the first of multiple matching element instances | Conform-by-Report | 1/5/2020 |
| CADconform for MicroStation v8.01.04 | B-20202374 | Change All may skip the first element | Conform | 1/5/2020 |
| CADconform for MicroStation v8.01.03 | B-20202372 | Possible crash fixing named dimensions in MicroStation Connect Edition | Configuration | 30/3/2020 |
| CADconform for MicroStation v8.01.01 | B-20202367 | Spurious 'elements outside border' when active view hides constructions, text or dims | Reporting | 7/2/2020 |
| CADconform for MicroStation v8.01.01 | B-20202366 | Spurious 'Unsupported Operation' error may appear when opening Preferences dialog | Configuration | 6/2/2020 |
| CADconform for MicroStation v8.01.01 | B-20202365 | Conforming may cause the new level to turn off in the view in Connect | Conform | 30/12/2019 |
| CADconform for MicroStation v8.01.00 RC6 | B-20192339 | Custom keyins are not saved for command features in Connect Edition | Feature Table Editor | 11/1/2019 |
| CADconform for MicroStation v8.01.00 RC5 | B-20182328 | CSV exporting writes invalid unicode in MicroStation CONNECT | HTML Reports | 28/8/2018 |
| CADconform for MicroStation v8.01.00 RC5 | B-20182327 | HTML Reporting creates an empty file in Connect Edition | HTML Reports | 28/8/2018 |
| CADconform for MicroStation v8.01.00 RC4 | B-20182324 | Pattern control elements may appear as reference file reporting errors | Reporting | 20/8/2018 |
| CADconform for MicroStation v8.01.00 RC12 | B-20192364 | Possible crash when opening a DGN branded with a database and logged into a discipline | Feature Table Mgr | 30/12/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192363 | Configuration variables with UNC paths may not work in Connect | Configuration | 16/10/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192359 | Possible crash when switching models with a conformance error highlighted | Conform; View Reports | 17/9/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192358 | Possible hang caused by endless loop when finding components of cells | Conform; View Reports | 27/9/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192357 | Possible crash when finding components of cells | Conform; View Reports | 23/9/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192356 | Invisible components of cells were being checked erroneously | Conform; Reporting | 9/9/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192355 | Models not placeable as cells were not cached, causing a cell cache miss | Conform; Reporting | 22/8/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192354 | Some ON/OFF toggles are not saved and restored via the settings file | Configuration | 22/8/2019 |
| CADconform for MicroStation v8.01.00 RC11 | B-20192353 | Rewriting dimensions with style overrides may cause a new symbology error | Conform | 22/8/2019 |
| CADconform for MicroStation v8.01.00 RC10 | B-20192351 | Fixed crash when closing MicroStation with Feature Tables open | Feature Table Editor | 7/8/2019 |
| CADconform for MicroStation v8.01.00 RC10 | B-20192348 | Importing Element Templates may cause a crash | Feature Table Editor | 30/7/2019 |
| CADconform for MicroStation v8.01.00 | B-20192345 | Enter Data Field corruption when copying between cells in Connect | Conform | 26/3/2019 |
| CADconform for MicroStation v8.00.86 | B-20202533 | CADconform will not load on PowerDraft or MicroStation V8i SS2 or earlier | Configuration | 20/11/2020 |
| CADconform for MicroStation v8.00.85 | B-20202520 | Element outside border report with active - not actual - symbology | Reporting | 7/8/2020 |
| CADconform for MicroStation v8.00.84 | B-20202388 | Possible crash drafting features with keyins > 1200 characters | Drafting Menu | 23/7/2020 |
| CADconform for MicroStation v8.00.84 | B-20202376 | Cell caching may cause conformance issues if RGB colours are used in the cell definition | Conform | 10/6/2020 |
| CADconform for MicroStation v8.00.84 | B-20202373 | Possible crash straight after logging in to a database | Configuration | 26/5/2020 |
| CADconform for MicroStation v8.00.83 | B-20202371 | The template configuration file may not create successfully on startup | Configuration | 3/3/2020 |
| CADconform for MicroStation v8.00.83 | B-20202370 | Possible crash on startup when files not found | Configuration | 3/3/2020 |
| CADconform for MicroStation v8.00.83 | B-20202369 | Fixed slow display of models with numerous nested reference files | Reporting | 28/2/2020 |
| CADconform for MicroStation v8.00.83 | B-20202368 | The set level command no longer worked in the Report dialog | Reporting | 28/2/2020 |
| CADconform for MicroStation v8.00.82 | B-20192362 | Referenced marker cells are now ignored if refs are not checksummed | Reporting; Watermarking | 9/10/2019 |
| CADconform for MicroStation v8.00.82 | B-20192361 | Scan feature type warning may appear when admin has locked off some features types | Reporting; Watermarking | 9/10/2019 |
| CADconform for MicroStation v8.00.82 | B-20192360 | Watermarks placed in V8i may invalidate in Connect if AutoCAD dimensions are found | Watermarking | 22/8/2019 |
| CADconform for MicroStation v8.00.81 | B-20192352 | "Unable to execute file" error during installation of Access DB drivers | Databases; Installer | 12/8/2019 |
| CADconform for MicroStation v8.00.81 | B-20192350 | Exporting to Excel did not work with 32-bit ACE drivers | Databases | 2/8/2019 |
| CADconform for MicroStation v8.00.81 | B-20192349 | Exporting an XLS report when the file existed may cause a crash | Databases | 2/8/2019 |
| CADconform for MicroStation v8.00.80 | B-20192347 | Upgrading old databases would sometimes show an SQL error | Databases | 5/7/2019 |
| CADconform for MicroStation v8.00.79 | B-20192346 | US text sizes containing apostrophes can cause SQL errors | Reporting | 14/6/2019 |
| CADconform for MicroStation v8.00.79 | B-20192344 | Checking on levels from Last View would sometimes fail | Conform; Reporting | 30/1/2019 |
| CADconform for MicroStation v8.00.78 | B-20192343 | Some reporting columns would be blank if values exceeded +-10 million | File History; Reporting | 25/1/2019 |
| CADconform for MicroStation v8.00.78 | B-20192342 | The weight and style report column options are transposed | File History; Reporting | 25/1/2019 |
| CADconform for MicroStation v8.00.77 | B-20182338 | Report Viewer may crash with > 66,000 error rows | View Reports | 21/12/2018 |
| CADconform for MicroStation v8.00.77 | B-20182337 | Mismatched text with zero size may report during Certify but not during Reporting | Reporting | 18/12/2018 |
| CADconform for MicroStation v8.00.77 | B-20192341 | Empty files caused the Design File Histogram to crash | File History | 15/1/2019 |
| CADconform for MicroStation v8.00.77 | B-20192340 | Levels beginning with a lower case letter may not be retained by the selection | Reporting | 15/1/2019 |
| CADconform for MicroStation v8.00.76 | B-20182335 | Preferences were erroneously saved with quotes around weighting integers | Conform | 9/10/2018 |
| CADconform for MicroStation v8.00.75 | B-20182334 | Some cells with patterning may not match cell library definition | Conform | 4/10/2018 |
| CADconform for MicroStation v8.00.75 | B-20182333 | Named cells may be reported as errors twice at the same FilePos in the detail report | Reporting | 1/10/2018 |
| CADconform for MicroStation v8.00.75 | B-20182332 | Orphan cell components are no longer skipped when Feature Summary is OFF | Reporting | 1/10/2018 |
| CADconform for MicroStation v8.00.74 | B-20182331 | Border sheets no longer require a saved drawing scale | Reporting | 12/9/2018 |
| CADconform for MicroStation v8.00.73 | B-20182330 | Cell components may show as errors after changing cell symbology in Conform | Conform | 12/9/2018 |
| CADconform for MicroStation v8.00.72 | B-20182329 | CSV importing may ignore some ranges and values | CSV Importing | 28/8/2018 |
| CADconform for MicroStation v8.00.71 | B-20182326 | Automatic brand renaming does not work when the database name is the only change | Branding | 13/7/2018 |
| CADconform for MicroStation v8.00.71 | B-20182325 | Command features may be missing keyin commands | Feature Table Editor | 20/8/2018 |
| CADconform for MicroStation v8.00.71 | B-20182322 | ByLevel linestyle does not display in ranges when the level does not exist | Conform-by-Ranges; Draft-by-Ranges | 10/5/2018 |
| CADconform for MicroStation v8.00.71 | B-20182321 | Draft & Conform by ranges toggle may be disabled incorrectly | Conform-by-Ranges; Draft-by-Ranges | 8/5/2018 |
| CADconform for MicroStation v8.00.71 | B-20182320 | Tag values could not be defined for some tag definition names | Feature Table Editor | 28/6/2016 |
| CADconform for MicroStation v8.00.71 | B-20182319 | Report naming may fail if the template is the same length as the embedded macro | Reporting | 12/4/2018 |
| CADconform for MicroStation v8.00.69 | B-20182317 | The reporting database is not reattached after reference branding | Feature Table Mgr | 6/4/2018 |
| CADconform for MicroStation v8.00.68 | B-20182316 | Renaming an existing feature table might fail | Feature Table Mgr | 6/4/2018 |
| CADconform for MicroStation v8.00.68 | B-20182315 | Text styles defined in reference files may not summarise onto the same report row | Reporting | 3/4/2018 |
| CADconform for MicroStation v8.00.66 | B-20182318 | Windows user names containing apostrophes may cause SQL errors | Reporting | 12/4/2018 |
| CADconform for MicroStation v8.00.66 | B-20182314 | Regional settings for Germany may cause SQL errors in reports | Reporting | 30/3/2018 |
| CADconform for MicroStation v8.00.66 | B-20182313 | Text styles defined in reference files may not match correctly | Reporting | 28/3/2018 |
| CADconform for MicroStation v8.00.66 | B-20182312 | Level names that were numbers may not retain selection in listbox | Conform; Reporting | 28/3/2018 |
| CADconform for MicroStation v8.00.66 | B-20182311 | Level selector may not show used reference levels in bold | Conform; Reporting | 27/3/2018 |
| CADconform for MicroStation v8.00.66 | B-20182310 | JET drivers do not fully support table names containing apostrophes | Reporting | 20/3/2018 |
| CADconform for MicroStation v8.00.65 | B-20182309 | Possible string buffer overflow caused by long database driver error messages | Databases | 16/3/2018 |
| CADconform for MicroStation v8.00.64 | B-20182308 | Hatch components may ignore hatch settings check if unknown cells are allowed | Conform; Reporting | 15/2/2018 |
| CADconform for MicroStation v8.00.64 | B-20182307 | Feature solids may show an error on the control level (level 0) | Conform; Reporting | 14/2/2018 |
| CADconform for MicroStation v8.00.63 | B-20172306 | Possible crash when generating a histogram with > 8 watermarks | File History | 11/12/2017 |
| CADconform for MicroStation v8.00.61 | B-20172305 | Watermarks may invalidate when switching models in the same DGN file | Watermarking | 23/11/2017 |
| CADconform for MicroStation v8.00.61 | B-20172304 | Possible buffer overflow reading features with keyins > 1024 characters | Feature Table Editor | 13/11/2017 |
| CADconform for MicroStation v8.00.60 | B-20172303 | Rendering the Cell Selector images would sometimes corrupt memory | Cell Selector | 26/10/2017 |
| CADconform for MicroStation v8.00.60 | B-20172302 | The Regenerate Images button was clearing files from the wrong path | Cell Selector | 26/10/2017 |
| CADconform for MicroStation v8.00.60 | B-20172301 | Fixed crash when the string filter clear icon was pressed | Cell Selector | 26/10/2017 |
| CADconform for MicroStation v8.00.60 | B-20172300 | Complex linear elements with B-splines may not fully conform | Conform | 24/10/2017 |
| CADconform for MicroStation v8.00.59 | B-20172299 | Fixed crash when a string filter was left active on dialog close | Cell Selector | 16/10/2017 |
| CADconform for MicroStation v8.00.59 | B-20172298 | Fixed possible memory corruption with finding files | Configuration | 5/10/2017 |
| CADconform for MicroStation v8.00.58 | B-20172297 | Fixed crash with automatic report name generation | Reporting | 5/10/2017 |
| CADconform for MicroStation v8.00.57 | B-20172296 | Branding multiple files may cause a crash | Feature Table Mgr | 4/9/2017 |
| CADconform for MicroStation v8.00.56 | B-20172295 | Background colour "BG" is not supported in the colour range string | Conform; Reporting | 28/8/2017 |
| CADconform for MicroStation v8.00.56 | B-20172294 | Reprojected ref files may report elements outside border | Reporting | 28/8/2017 |
| CADconform for MicroStation v8.00.55 | B-20172293 | Watermark report may cause MicroStation to hang | Reporting | 15/8/2017 |
| CADconform for MicroStation v8.00.54 | B-20172292 | The cell preview may sometimes fail to render at all | Cell Selector; Conform | 10/8/2017 |
| CADconform for MicroStation v8.00.54 | B-20172291 | The choose cell dialog scale lock may not be changeable | Cell Selector; Conform | 10/8/2017 |
| CADconform for MicroStation v8.00.53 | B-20172290 | Locked tables are not bypassing the Feature Table Manager | Feature Table Mgr | 22/6/2017 |
| CADconform for MicroStation v8.00.53 | B-20172288 | Locked tables are not automatically loaded | Feature Table Mgr; User Manager | 22/6/2017 |
| CADconform for MicroStation v8.00.53 | B-20172287 | The current user is not selected when the User Manager is opened | User Manager | 21/6/2017 |
| CADconform for MicroStation v8.00.53 | B-20172286 | Updating branding does not disable feature tables that are not allowed | Conform | 21/6/2017 |
| CADconform for MicroStation v8.00.53 | B-20172285 | Automatic display of undisplayed levels in Conform did not work | Conform | 21/6/2017 |
| CADconform for MicroStation v8.00.53 | B-20172284 | Wildcards were not working when the type was set to < 4 | Other | 19/6/2017 |
| CADconform for MicroStation v8.00.52 | B-20172283 | Linestyle control elements may flag as errors when allowing unknown cells | Conform; Reporting | 6/6/2017 |
| CADconform for MicroStation v8.00.52 | B-20172282 | The replacement cell checksum was not consistent in the Conform Preview | Conform | 6/6/2017 |
| CADconform for MicroStation v8.00.51 | B-20172281 | Fixed possible crash when editing the File DSNs | User Manager | 31/5/2017 |
| CADconform for MicroStation v8.00.51 | B-20172280 | Some commands on the User Manager may not launch correctly | User Manager | 31/5/2017 |
| CADconform for MicroStation v8.00.50 | B-20172279 | Reference files may be added as duplicated master models in report | Batch Processor; Reporting | 23/5/2017 |
| CADconform for MicroStation v8.00.50 | B-20142050 | Manually placing marker cells in a reference file causes invalidation | Watermarking | 22/5/2017 |
| CADconform for MicroStation v8.00.49 | B-20172278 | The choose cell preview window shows '(Empty text)' in Conform | Conform | 18/5/2017 |
| CADconform for MicroStation v8.00.48 | B-20172277 | Database may truncate user keyin after first character | Databases | 11/4/2017 |
| CADconform for MicroStation v8.00.48 | B-20172276 | Exporting multiple tables to HTML may not work from the FTE window | Feature Table Editor | 7/4/2017 |
| CADconform for MicroStation v8.00.47 | B-20172275 | View Preferences may not display the active settings correctly | Preferences | 4/4/2017 |
| CADconform for MicroStation v8.00.47 | B-20172274 | Crash when using scan period on a model with multiple watermarks | Reporting | 3/4/2017 |
| CADconform for MicroStation v8.00.47 | B-20172273 | Crash when manually exporting a report to a text file | Reporting | 3/4/2017 |
| CADconform for MicroStation v8.00.46 | B-20172272 | Intermittent crash when auto-exporting text or CSV reports | Reporting | 31/3/2017 |
| CADconform for MicroStation v8.00.46 | B-20172270 | ProjectWise Managed Workspaces produce an undefined symbol error | Configuration | 20/3/2017 |
| CADconform for MicroStation v8.00.45 | B-20172269 | MicroStation-based platforms might be toggled ON when not installed | Installer | 15/2/2017 |
| CADconform for MicroStation v8.00.45 | B-20172268 | Current scale may not be set correctly when conforming by ranges in Reports | Conform-by-Ranges; Conform-by-Report | 14/2/2017 |
| CADconform for MicroStation v8.00.45 | B-20172267 | Dimension scale now gets reset to 1 after Change-All operation | Conform | 10/2/2017 |
| CADconform for MicroStation v8.00.45 | B-20172266 | Markers and watermarks are found in undisplayed reference files | Watermarking | 8/2/2017 |
| CADconform for MicroStation v8.00.45 | B-20172265 | Markers and watermarks are found when reference-clipped | Watermarking | 8/2/2017 |
| CADconform for MicroStation v8.00.45 | B-20172264 | Possible crash when switching branded models with Draft Menu open | Drafting Menu | 6/2/2017 |
| CADconform for MicroStation v8.00.42 | B-20172262 | Socket errors connecting to ALS may cause a buffer overflow | Licensing | 5/1/2017 |
| CADconform for MicroStation v8.00.40 | B-20162259 | Setting the dimension level when Drafting has no effect | Draft-by-Ranges; Drafting Menu | 25/11/2016 |
| CADconform for MicroStation v8.00.40 | B-20162258 | Design file paths containing em-dash are not supported | API; Batch Processor; Reporting | 22/11/2016 |
| CADconform for MicroStation v8.00.40 | B-20162257 | The batch processing command reports 'Command not defined' | Batch Processor | 22/11/2016 |
| CADconform for MicroStation v8.00.39 | B-20162256 | Text nodes with difference line-spacing types might not be found | Conform | 17/11/2016 |
| CADconform for MicroStation v8.00.39 | B-20162255 | Certification is skipping checking of reference files | Watermarking | 17/11/2016 |
| CADconform for MicroStation v8.00.39 | B-20162254 | Manually entering the eval licence details doesn't work | Licensing | 15/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162253 | The Report Viewer may re-order the secondary sort column on mouse-click | Reporting | 9/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162252 | Reporting does not support file/model names defined using Perl regex's | Reporting | 9/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162251 | Intermittent problem with SQL strings containing extraneous data | Reporting | 8/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162250 | Feature summary may report errors for cells with mismatched components | Reporting | 7/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162249 | Zoom in 3D files may set the view clipping plane past the element | Conform; Reporting | 7/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162248 | The password file was not written out correctly, resulting in spurious errors | User Manager | 7/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162247 | Some file path config variables do not read correctly | Configuration | 4/11/2016 |
| CADconform for MicroStation v8.00.36 | B-20162241 | Fixed incorrect icon display when ByLevel value is incorrectly set to -1 | Reporting | 19/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162240 | Possible string buffer overflow on extraction of computer name | Licensing | 4/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162246 | The Find Feature tool may fail for orphan cell components | Reporting | 25/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162245 | The Find Feature tool may fail for elements with 24-bit colours defined | Reporting | 20/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162244 | Some dimension settings were not shown to 3 significant figures | Reporting | 20/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162243 | Dimension style names were not matched correctly | Reporting | 20/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162242 | Conform/Draft now updates ByLevel correctly when supported in ranges | Conform | 19/10/2016 |
| CADconform for MicroStation v8.00.35 | B-20162239 | Disabling the automatic adding of reference file may not work | Reporting | 9/9/2016 |
| CADconform for MicroStation v8.00.35 | B-20162238 | Conform show/hide may not work | Conform | 1/9/2016 |
| CADconform for MicroStation v8.00.34 | B-20162237 | Tags missing the associated element may not conform | Conform | 22/8/2016 |
| CADconform for MicroStation v8.00.33 | B-20162234 | Possible crash when certifying with replacement watermark text | Reporting | 19/8/2016 |
| CADconform for MicroStation v8.00.32 | B-20162233 | Possible crash when conforming multi-lined text nodes | Conform | 15/8/2016 |
| CADconform for MicroStation v8.00.30 | B-20162232 | Some smart surfaces are not recognised as valid 3D Objects | Conform; Reporting | 8/8/2016 |
| CADconform for MicroStation v8.00.30 | B-20162231 | Conform only displays up to 2 rows of file names to conform to | Conform | 22/7/2016 |
| CADconform for MicroStation v8.00.30 | B-20162230 | Conform cannot replace cells on non-existent levels | Conform | 21/7/2016 |
| CADconform for MicroStation v8.00.30 | B-20162229 | The cell cache does not support cell library paths containing a comma | Conform; Reporting | 21/7/2016 |
| CADconform for MicroStation v8.00.30 | B-20162228 | Import CSV feature/elements type column may be overridden | CSV Importing | 21/7/2016 |
| CADconform for MicroStation v8.00.30 | B-20162227 | The signature and title block cell libraries are not read correctly | Configuration | 19/7/2016 |
| CADconform for MicroStation v8.00.30 | B-20162226 | Possilbe string index error when reading empty CSV fields | CSV Importing | 19/7/2016 |
| CADconform for MicroStation v8.00.30 | B-20162225 | CSV linestyle ranges over 64 characters are ignored | CSV Importing | 19/7/2016 |
| CADconform for MicroStation v8.00.30 | B-20162224 | String buffer overflow when reading long qualified CSV fields | CSV Importing | 18/7/2016 |
| CADconform for MicroStation v8.00.29 | B-20162223 | CADconform toolbox does not retain vertical docking between sessions | Tool Palettes | 12/7/2016 |
| CADconform for MicroStation v8.00.29 | B-20162222 | Listbox docking height is correct on startup when NET docked left/right | Drafting Menu | 12/7/2016 |
| CADconform for MicroStation v8.00.29 | B-20162221 | Improved unicode support for Chinese characters | Conform | 28/6/2016 |
| CADconform for MicroStation v8.00.29 | B-20162220 | Possible crash when checking custom linestyles | Conform | 28/6/2016 |
| CADconform for MicroStation v8.00.29 | B-20162219 | Group login now retrieves the Windows user full name instead of login ID | Login | 28/6/2016 |
| CADconform for MicroStation v8.00.28 | B-20162218 | Some configuration variables were clipped to 256 characters | Configuration | 27/6/2016 |
| CADconform for MicroStation v8.00.27 | B-20162217 | Smart Solids and Meshes may not report level or symbology correctly | Conform; Reporting | 17/6/2016 |
| CADconform for MicroStation v8.00.27 | B-20162216 | Fixed read buffer overflow when certifying design files | View Reports; Watermarking | 17/6/2016 |
| CADconform for MicroStation v8.00.26 | B-20172271 | Opening a feature table may cause an exception error | Feature Table Mgr | 15/6/2016 |
| CADconform for MicroStation v8.00.25 | B-20162215 | 3D Solids use the symbology of the header, instead of the components | Conform; Reporting | 10/6/2016 |
| CADconform for MicroStation v8.00.25 | B-20162214 | Client version update may not work if set at the project level or higher | Configuration | 9/6/2016 |
| CADconform for MicroStation v8.00.25 | B-20162213 | Potential stack corruption bug when recursing variable argument lists | Conform; Reporting | 2/6/2016 |
| CADconform for MicroStation v8.00.23 | B-20162212 | Cache files made under V8i SS3 may fail to match when read on SS4 | Conform; Reporting | 24/5/2016 |
| CADconform for MicroStation v8.00.22 | B-20162211 | Fixed possible endless loop when opening feature tables with Text Styles | Feature Table Editor | 18/5/2016 |
| CADconform for MicroStation v8.00.22 | B-20162210 | Prompt for marker cell placement has now been removed | Drafting Menu; Reporting | 16/5/2016 |
| CADconform for MicroStation v8.00.22 | B-20152149 | After opening a new model, the watermarking cell library remains attached | Watermarking | 16/5/2016 |
| CADconform for MicroStation v8.00.22 | B-20162260 | One machine may check out two licences from the pool | Licensing | 14/12/2016 |
| CADconform for MicroStation v8.00.21 | B-20162207 | Tabbing out of the user name was not always setting the focus to the password | Login | 11/4/2016 |
| CADconform for MicroStation v8.00.21 | B-20162235 | Pooled licences that fail maintenance / product / dept check may be retained | Licensing | 1/4/2016 |
| CADconform for MicroStation v8.00.21 | B-20162209 | Selected rows in XM may not be legible if set to hidden | Login | 13/5/2016 |
| CADconform for MicroStation v8.00.21 | B-20162208 | Sometimes the login password would not be recorded correctly | Login | 13/5/2016 |
| CADconform for MicroStation v8.00.18 | B-20162204 | The fix ranges option may remain disabled in Conform | Conform | 25/2/2016 |
| CADconform for MicroStation v8.00.17 | B-20162203 | The Verify Watermark tool may not invalidate if Instant Invalidation is OFF | Watermarking | 24/2/2016 |
| CADconform for MicroStation v8.00.17 | B-20162202 | Invisible elements may cause parts of the file to not be certified | Watermarking | 24/2/2016 |
| CADconform for MicroStation v8.00.16 | B-20162201 | Reference files may be inserted at the wrong location in the report list | Batch Processor | 15/2/2016 |
| CADconform for MicroStation v8.00.16 | B-20162200 | Potential memory corruption when finding cell libraries or design files | Batch Processor | 15/2/2016 |
| CADconform for MicroStation v8.00.16 | B-20162199 | Rotated text-nodes may lose rotation on conforming | Conform | 15/2/2016 |
| CADconform for MicroStation v8.00.16 | B-20162198 | Crash when attempting to change a feature locked to a different model | Conform | 15/2/2016 |
| CADconform for MicroStation v8.00.15 | B-20162236 | Maintenance expiry date may show an invalid string in MicroStation XM | Licensing | 11/1/2016 |
| CADconform for MicroStation v8.00.15 | B-20162196 | The level picker may not display all levels in master of DGNLIB models | Conform; Reporting | 5/1/2016 |
| CADconform for MicroStation v8.00.15 | B-20162195 | Conform-to may not work across different models or design files | Conform-by-Report | 4/1/2016 |
| CADconform for MicroStation v8.00.15 | B-20152194 | The active scale is sometimes factored in when the toggle is OFF | Drawing Scale | 30/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20152193 | Cells with scale lock on should default to the same scale for each axis | Conform | 23/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20152192 | Conform-to may replace components of named cells erroneously | Conform-by-Report | 21/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20152191 | Scale discrepancy between balloon help and text in Conform | Conform | 17/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20152190 | Possible crash when auto-fetching references from a non-border model | Reporting | 2/12/2015 |
| CADconform for MicroStation v8.00.13 | B-20152189 | Crash when conforming certain text nodes | Conform | 19/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152188 | Error scale is calculated incorrectly when conforming from the Report | View Reports | 8/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152187 | Report icon colours may show incorrectly after a file compress | View Reports | 8/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152186 | Text rotation of the first error is applied to all subsequent text in Change All | Conform | 8/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152185 | Dimension scale is applied to all elements with differing scales | Conform | 8/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152183 | Text rotation applies the first defined angle to all text node components | Conform | 7/10/2015 |
| CADconform for MicroStation v8.00.11 | B-20152182 | Only call the drawing scale custom command when a new scale is saved | Drawing Scale | 29/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152181 | The separator icon does not display in the list-box | Drafting Menu; Feature Table Editor | 25/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152180 | Linear and shape icons show as white in MicroStation V8i menus | Drafting Menu; Feature Table Editor | 25/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152179 | Spurious errors about text size may appear when using multiscales | Conform-by-Ranges | 23/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152178 | Conforming from the report does not tally text components of nodes | Reporting | 22/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152177 | Setting the class or graphic group of text nodes doesn't set the components | Conform | 18/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152176 | Line spacing error scale was causing discrepancies between Find and Conform | Reporting | 18/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152175 | Problems with exporting multiple dictionaries in the FTE | Feature Table Editor | 16/9/2015 |
| CADconform for MicroStation v8.00.11 | B-20152174 | The tab page list is still shown when the preview is turned off | Conform | 11/9/2015 |
| CADconform for MicroStation v8.00.10 | B-20152171 | Setting reporting levels may not work if levels are defined only in references | Reporting | 18/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152170 | Selecting all design rows to set reporting levels may reset the level selection to '<ALL>' | Reporting | 18/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152169 | Processing multiple rows with 1 element may produce spurious warning | Reporting | 13/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152168 | Magenta rows are difficult to read when selection turns them white | Conform | 11/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152167 | ByLevel icon colours may show incorrectly when switching reporting models | Reporting | 11/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152166 | Dimensions and notes cannot be reviewed as suggested features | Conform; Suggest a Feature | 7/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152165 | The conform change preview image applies the drawing scale twice | Conform | 7/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152163 | Drag and drop from Explorer does not work correctly | Reporting | 5/8/2015 |
| CADconform for MicroStation v8.00.10 | B-20152162 | Cells containing note dimensions may report as differing from library | Conform; Reporting | 27/7/2015 |
| CADconform for MicroStation v8.00.07 | B-20152160 | Removing reported reference files may not handle nesting correctly | Reporting | 20/7/2015 |
| CADconform for MicroStation v8.00.07 | B-20152159 | Conforming from the Error List report may conform all matching features | Reporting | 20/7/2015 |
| CADconform for MicroStation v8.00.07 | B-20152158 | Brief & Full description columns may show the symbology keyin description | Reporting | 17/7/2015 |
| CADconform for MicroStation v8.00.07 | B-20152156 | Feature summary report may skip the first component error in orphan cells | Reporting | 16/7/2015 |
| CADconform for MicroStation v8.00.07 | B-20152155 | Change All may produce an error with components of Orphan Cells | Conform; Reporting | 15/7/2015 |
| CADconform for MicroStation v8.00.06 | B-20152154 | Normal cells may match 3D solids | Conform; Reporting | 13/7/2015 |
| CADconform for MicroStation v8.00.06 | B-20152153 | Font numbers are checked even when the option is disabled | Watermarking | 10/7/2015 |
| CADconform for MicroStation v8.00.05 | B-20152152 | Conform-by-Report does not handle multiple selections correctly | Reporting | 8/7/2015 |
| CADconform for MicroStation v8.00.05 | B-20152151 | Elements outside the border are not reported correctly in the Detailed report | Reporting | 2/7/2015 |
| CADconform for MicroStation v8.00.04 | B-20152150 | Conform-by-draft returns an error message | Drafting Menu | 22/6/2015 |
| CADconform for MicroStation v8.00.03 | B-20152148 | Reopening Cell Selector after filtering with strings may crash | Cell Selector | 1/5/2015 |
| CADconform for MicroStation v8.00.03 | B-20152147 | Changing cells from the Report Viewer may not preserve custom scale | Reporting | 29/4/2015 |
| CADconform for MicroStation v8.00.02 | B-20152146 | Cell preview icons may show through dialog when switching modes in MS2004 | Cell Selector | 23/4/2015 |
| CADconform for MicroStation v8.00.02 | B-20152145 | Incorrect preview images are shown when cell caching is disabled | Cell Selector | 23/4/2015 |
| CADconform for MicroStation v8.00.01 | B-20152144 | The Drawing Scale popup item won't open in MS2004 | Conform | 22/4/2015 |
| CADconform for MicroStation v8.00.01 | B-20152143 | Batch Reports dialog won't open in MS2004 due to missing icon | Reporting | 22/4/2015 |
| CADconform for MicroStation v8.00.01 | B-20152142 | Text nodes with non-LT justification may move after conforming | Conform | 8/4/2015 |
| CADconform for MicroStation v8.00.01 | B-20152140 | Nested complex components may not conform from Report correctly | Conform; Reporting | 31/3/2015 |
| CADconform for MicroStation v8.00.01 | B-20152139 | True RGB colours (>255) do not show the correct preview colour | HTML Reports | 27/3/2015 |
| CADconform for MicroStation v8.00.01 | B-20152138 | ByLevel colours do not show the correct preview colour | HTML Reports | 27/3/2015 |
| CADconform for MicroStation v8.00.00 | B-20152137 | Text size that matches in range may not conform to proper value | Conform | 25/3/2015 |
| CADconform for MicroStation v7.03.21 | B-20152135 | Negative text sizes are now unmirrored and unrotated after conforming | Conform | 12/3/2015 |
| CADconform for MicroStation v7.03.21 | B-20152134 | Certification fails to find marker cells on models with when > 255 refs | Watermarking | 12/3/2015 |
| CADconform for MicroStation v7.03.20 | B-20152133 | Line-spacing 'At Least' wasn't matching if a non-unary drawing scale was set | Conform | 5/3/2015 |
| CADconform for MicroStation v7.03.20 | B-20152132 | Conform cannot fix 'text style: none' if it is the only problem | Conform | 5/3/2015 |
| CADconform for MicroStation v7.03.20 | B-20152131 | Editing the login name when a user group is defined behaves oddly | Login | 4/3/2015 |
| CADconform for MicroStation v7.03.20 | B-20152130 | Dimension scale might not apply value to all elements in Change All | Conform | 3/3/2015 |
| CADconform for MicroStation v7.03.20 | B-20152129 | Feature Summary might not group some matching features | Reporting | 26/2/2015 |
| CADconform for MicroStation v7.03.20 | B-20152128 | Report Viewer can't find scaled elements with custom linestyles | Reporting | 26/2/2015 |
| CADconform for MicroStation v7.03.20 | B-20152127 | The 'Replace with Active Model' icon does not display in SS2 | Reporting | 26/2/2015 |
| CADconform for MicroStation v7.03.19 | B-20152126 | Bottom/Descender justified text nodes may move after conforming | Conform | 20/2/2015 |
| CADconform for MicroStation v7.03.19 | B-20152125 | Text with unmapped characters may not preview correctly | Conform | 19/2/2015 |
| CADconform for MicroStation v7.03.19 | B-20152124 | Viewing Report may fail to find text if design coordinate readout is zero | Reporting | 19/2/2015 |
| CADconform for MicroStation v7.03.19 | B-20152123 | Differing linestyles may report a 100% match if ByLevel values are equal | Conform | 18/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152121 | Cannot apply a named dimension to a leader/note | Conform | 9/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152120 | Cannot apply Text Style (none) to a dimension or leader | Conform | 9/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152119 | Feature type menu icons are missing for solids, hatches and notes | Drafting Menu | 6/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152118 | Hatches do not retain fill colour and type. | Feature Table Editor | 6/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152117 | Linear feature created from scratch create duplicate default placement keyins | Feature Table Editor | 6/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152116 | Dimension style ranges are not storing the first entry correctly | Feature Table Editor | 5/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152114 | Rotated text nodes with word-wrapping may not display correctly | Conform | 4/2/2015 |
| CADconform for MicroStation v7.03.18 | B-20152111 | Multi-line dimensions may not read overridden font correctly | Conform; Reporting | 28/1/2015 |
| CADconform for MicroStation v7.03.18 | B-20152110 | Unmatched cells did not fully replace all cells in a Change All | Conform | 28/1/2015 |
| CADconform for MicroStation v7.03.18 | B-20152113 | A deleted feature table may remain in memory if already loaded | Feature Table Mgr | 30/1/2015 |
| CADconform for MicroStation v7.03.18 | B-20152112 | Dimension style settings may not be applied for unspecified match criteria | Conform | 3/2/2015 |
| CADconform for MicroStation v7.03.17 | B-20152109 | Negative dimension extension offset values are now handled correctly | Reporting | 28/1/2015 |
| CADconform for MicroStation v7.03.17 | B-20152108 | Error summary report scale is no longer used to verify feature matches | Reporting | 28/1/2015 |
| CADconform for MicroStation v7.03.17 | B-20152107 | Dimension/Text style '<none>' was not handled properly in report viewing/finding | Reporting | 28/1/2015 |
| CADconform for MicroStation v7.03.17 | B-20152106 | Error scale was not handling UORs correctly in report viewing and finding | Reporting | 28/1/2015 |
| CADconform for MicroStation v7.03.17 | B-20152105 | Text or dimension style may not match correctly for Report > Find Feature | Reporting | 21/1/2015 |
| CADconform for MicroStation v7.03.17 | B-20152104 | Dimension Styles may report as 'No Style' if partial description chosen | Reporting | 21/1/2015 |
| CADconform for MicroStation v7.03.17 | B-20152103 | Text elements with missing styles should be treated as having no style | Conform; Reporting | 21/1/2015 |
| CADconform for MicroStation v7.03.16 | B-20152102 | Double-clicking the top row with no active selection causes a spurious error | Reporting | 20/1/2015 |
| CADconform for MicroStation v7.03.16 | B-20152101 | Text style overrides were not allowing small error margins for rounding | Conform | 20/1/2015 |
| CADconform for MicroStation v7.03.16 | B-20152100 | Ranged criteria only gets conformed it the criteria was incorrect | Conform | 20/1/2015 |
| CADconform for MicroStation v7.03.15 | B-20152099 | Text size may not be conformed properly when UORs are set to 1.0 | Conform | 16/1/2015 |
| CADconform for MicroStation v7.03.15 | B-20152098 | Text Styles with zero text size are properly handled | Conform | 14/1/2015 |
| CADconform for MicroStation v7.03.15 | B-20152097 | Centre justified text may not position text components correctly on the X axis | Conform | 13/1/2015 |
| CADconform for MicroStation v7.03.14 | B-20152096 | Text size and spacing errors were allowed when out by 1 master unit | Conform; Reporting | 9/1/2015 |
| CADconform for MicroStation v7.03.14 | B-20152095 | Changing dimensions within cells may create an endless loop | Conform; Reporting | 8/1/2015 |
| CADconform for MicroStation v7.03.14 | B-20152094 | Change All may report changing zero text elements | Conform | 6/1/2015 |
| CADconform for MicroStation v7.03.14 | B-20152093 | Conforming may ignore text size if a text style is set | Reporting | 2/1/2015 |
| CADconform for MicroStation v7.03.13 | B-20142092 | Tabs and whitespace are not correctly handled in text nodes | Conform | 22/12/2014 |
| CADconform for MicroStation v7.03.12 | B-20142091 | Multiple selections are not always processed in Report Conform/Delete/Drop | Reporting | 21/11/2014 |
| CADconform for MicroStation v7.03.12 | B-20142090 | Text nodes with Centre Top/Bottom/Descender justification conform with bad origin | Conform | 30/10/2014 |
| CADconform for MicroStation v7.03.12 | B-20142089 | Text nodes with "At Least" line-spacing now show correct size | Conform | 30/10/2014 |
| CADconform for MicroStation v7.03.12 | B-20142088 | Multi-line Text Noes may overlap after conforming | Conform | 30/10/2014 |
| CADconform for MicroStation v7.03.11 | B-20142087 | Certification report may find components of invisible complex elements | Reporting | 23/10/2014 |
| CADconform for MicroStation v7.03.11 | B-20142086 | Incorrect dimension text size does not conform | Conform | 17/10/2014 |
| CADconform for MicroStation v7.03.10 | B-20142085 | The install location of AECOSim was not extracted from the registry correctly | Installer | 15/10/2014 |
| CADconform for MicroStation v7.03.10 | B-20142084 | B-splines may mess up the zoom magnification | Conform | 29/9/2014 |
| CADconform for MicroStation v7.03.10 | B-20142082 | Text nodes with 'descender' justification get set to origin (0,0,0) | Conform | 12/9/2014 |
| CADconform for MicroStation v7.03.10 | B-20142081 | Attaching a cell library may invalidate existing watermarks | Watermarking | 12/9/2014 |
| CADconform for MicroStation v7.03.10 | B-20142080 | Fixed crash when using Report > Find Feature | Reporting | 9/9/2014 |
| CADconform for MicroStation v7.03.07 | B-20142073 | Spurious error when a model has both undisplayed and missing refs | Reporting | 4/7/2014 |
| CADconform for MicroStation v7.03.07 | B-20142072 | Selected references display with white text on a white background | Reporting | 2/7/2014 |
| CADconform for MicroStation v7.03.07 | B-20142071 | Linespacing is incorrect when changing text size | Conform | 1/7/2014 |
| CADconform for MicroStation v7.03.07 | B-20142070 | Incorrect values displayed with the 'Show Scaled Values' toggle | Conform | 26/6/2014 |
| CADconform for MicroStation v7.03.07 | B-20142069 | Spurious text size out-of-range error when using multiscale | Conform | 25/6/2014 |
| CADconform for MicroStation v7.03.07 | B-20142068 | Text width out of range error displays incorrect UOR conversion | Conform | 25/6/2014 |
| CADconform for MicroStation v7.03.07 | B-20142065 | Problem with deleting multiple design files from reporting list | Reporting | 19/6/2014 |
| CADconform for MicroStation v7.03.06 | B-20142063 | Replacing an unnamed cell may reuse the old incorrect cell definition | Conform | 13/5/2014 |
| CADconform for MicroStation v7.03.06 | B-20142062 | Reporting on references may produce errors when UORs differ | Reporting | 13/5/2014 |
| CADconform for MicroStation v7.03.06 | B-20142061 | Leaders and Hatches are not shown in HTML Report | HTML Reports | 12/5/2014 |
| CADconform for MicroStation v7.03.05 | B-20091489 | HTML Report doesn't work when path is UNC | HTML Reports | 8/4/2014 |
| CADconform for MicroStation v7.03.05 | B-20142060 | Error message when running HTML Reports | HTML Reports | 12/5/2014 |
| CADconform for MicroStation v7.03.05 | B-20142059 | 3D Solids are not shown in HTML Report | HTML Reports | 12/5/2014 |
| CADconform for MicroStation v7.03.04 | B-20142051 | The Drafting string filter does not work | Drafting Menu | 8/4/2014 |
| CADconform for MicroStation v7.03.03 | B-20142047 | Intermittent problem with Drafting listbox showing empty | Drafting Menu | 17/3/2014 |
| CADconform for MicroStation v7.03.02 | B-20142044 | Change All no longer sets scale to zero for cells that have no definition | Conform | 5/3/2014 |
| CADconform for MicroStation v7.03.01 | B-20142042 | Dimension font may not get set correctly when drafting | Drafting Menu | 17/1/2014 |
| CADconform for MicroStation v7.03.01 | B-20142041 | Reporting list-box may show blank for design files containing an em-dash | Reporting | 17/1/2014 |
| CADconform for MicroStation v7.01.75 | B-20142083 | Crash repairing diameter dimension in one dataset | Conform | 22/9/2014 |
| CADconform for MicroStation v7.01.74 | B-20142078 | The View Report feature selector filter does not re-initialise on startup | Reporting | 26/8/2014 |
| CADconform for MicroStation v7.01.73 | B-20142077 | Crash when loading an older v6 licence | Login | 25/8/2014 |
| CADconform for MicroStation v7.01.73 | B-20142076 | Models with no active view may produce erroneous reports | Batch Processor; Reporting; Watermarking | 22/8/2014 |
| CADconform for MicroStation v7.01.73 | B-20142075 | Models with very large level numbers may cause performance issues | Conform | 20/8/2014 |
| CADconform for MicroStation v7.01.72 | B-20142074 | Cell Selector overrides active scale with 1 if no scale set | Cell Selector | 10/7/2014 |
| CADconform for MicroStation v7.01.71 | B-20142067 | The default location for suggested features should not be 'Untitled Group' | Suggest a Feature | 19/6/2014 |
| CADconform for MicroStation v7.01.71 | B-20142066 | Reference file nesting may display in the wrong order | Reporting | 19/6/2014 |
| CADconform for MicroStation v7.01.70 | B-20142058 | The drafting menu may not follow the mouse location correctly | Drafting Menu | 1/5/2014 |
| CADconform for MicroStation v7.01.70 | B-20142057 | Focusing into the keyin window modifies the feature table | Feature Table Editor | 1/5/2014 |
| CADconform for MicroStation v7.01.70 | B-20142056 | Display of sizes may strip trailing zeroes before the decimal point | Conform | 24/4/2014 |
| CADconform for MicroStation v7.01.70 | B-20142055 | Cell scale problems may display incorrect match score | Conform | 24/4/2014 |
| CADconform for MicroStation v7.01.69 | B-20142054 | Occasional crash using Cell Selector when switching features | Cell Selector | 22/4/2014 |
| CADconform for MicroStation v7.01.69 | B-20142052 | The CADconform cell selector keyin may get set multiple times | Feature Table Editor | 11/4/2014 |
| CADconform for MicroStation v7.01.68 | B-20142053 | Crash due to missing function in V8i SelectSeries 2 | Drafting Menu | 17/4/2014 |
| CADconform for MicroStation v7.01.67 | B-20142049 | Conform may apply active scale twice when conforming by ranges | Conform | 19/3/2014 |
| CADconform for MicroStation v7.01.67 | B-20142048 | Cell selector may display wrong preview image when using string filter | Cell Selector | 18/3/2014 |
| CADconform for MicroStation v7.01.67 | B-20142046 | Cell previews now force display of construction lines, patterns, dimensions, etc | Cell Selector | 12/3/2014 |
| CADconform for MicroStation v7.01.67 | B-20142045 | Potential crash when switching from a large cell library to a small one | Cell Selector | 11/3/2014 |
| CADconform for MicroStation v7.01.66 | B-20142040 | Cell selector may leave docking handles on-screen after undocking | Cell Selector | 7/1/2014 |
| CADconform for MicroStation v7.01.66 | B-20142039 | Cell selector may not work if no feature has ever been activated | Cell Selector | 7/1/2014 |
| CADconform for MicroStation v7.01.64 | B-20132037 | Conform from report is not clearing the previous string on startup | Reporting | 3/12/2013 |
| CADconform for MicroStation v7.01.64 | B-20132036 | Conform is dropping inline superscript characters to normal script | Conform | 15/11/2013 |
| CADconform for MicroStation v7.01.64 | B-20132035 | Text colour is no longer ignored when matching cell definitions | Conform | 14/11/2013 |
| CADconform for MicroStation v7.01.64 | B-20132034 | A patch install may not fetch the previous share path correctly | Installer | 7/11/2013 |
| CADconform for MicroStation v7.01.60 | B-20132033 | Text rotation is set in degrees instead of radians | Conform | 13/10/2013 |
| CADconform for MicroStation v7.01.60 | B-20132032 | Cell level checksumming may fail due to duplicate levels with differing IDs | Conform | 10/10/2013 |
| CADconform for MicroStation v7.01.60 | B-20132031 | Cell definition checking may fail due to mismatched linestyle case | Conform | 10/10/2013 |
| CADconform for MicroStation v7.01.60 | B-20132030 | Conformed text nodes may inherit the active symbology settings | Conform | 3/10/2013 |
| CADconform for MicroStation v7.01.59 | B-20132029 | Change All may fail on custom linestyle scales of zero | Conform | 2/10/2013 |
| CADconform for MicroStation v7.01.59 | B-20132028 | Cell selector was not expanding all wildcard paths correctly | Drafting Menu | 2/10/2013 |
| CADconform for MicroStation v7.01.59 | B-20132027 | Check cell definition should ignore invisible text elements | Conform | 12/9/2013 |
| CADconform for MicroStation v7.01.58 | B-20132026 | Elements with no displayed tags may show a symbology error | Conform | 10/9/2013 |
| CADconform for MicroStation v7.01.57 | B-20132025 | Tag symbology is no longer checked for undisplayed tags | Conform | 5/9/2013 |
| CADconform for MicroStation v7.01.57 | B-20132024 | Tag symbology checking assumed all tags had the same symbology | Conform | 4/9/2013 |
| CADconform for MicroStation v7.01.57 | B-20132023 | Tag symbology scoring was not accurate | Conform | 4/9/2013 |
| CADconform for MicroStation v7.01.57 | B-20132022 | Fixing tag symbology of cells does not work | Conform | 4/9/2013 |
| CADconform for MicroStation v7.01.57 | B-20132021 | Commas in tag values may cause an erroneous value mismatch | Conform | 22/8/2013 |
| CADconform for MicroStation v7.01.56 | B-20132020 | Tag symbology checking may result in >100% feature match | Conform | 15/8/2013 |
| CADconform for MicroStation v7.01.54 | B-20132019 | Extension lines on/off does not work in German | Feature Table Editor | 13/6/2013 |
| CADconform for MicroStation v7.01.54 | B-20132018 | Blank level descriptions show as garbage in the level selector | Conform; Reporting | 7/6/2013 |
| CADconform for MicroStation v7.01.54 | B-20132017 | Tag definitions containing a comma are not supported | Feature Table Editor | 4/6/2013 |
| CADconform for MicroStation v7.01.52 Beta 4 | B-20132013 | Zoom in Conform may not show all elements within the Z clipping range | Reporting; Watermarking | 8/3/2013 |
| CADconform for MicroStation v7.01.52 Beta 4 | B-20132012 | Scan problems with reference elements outside the z-depth of the master model | Reporting; Watermarking | 7/3/2013 |
| CADconform for MicroStation v7.01.52 Beta 3 | B-20132010 | Possible internal string buffer overflow during unicode conversion | Conform; Reporting | 28/2/2013 |
| CADconform for MicroStation v7.01.52 Beta 3 | B-20132009 | Referenced rotated text may appear outside the border in MS2004 | Conform; Reporting | 27/2/2013 |
| CADconform for MicroStation v7.01.52 Beta 3 | B-20132008 | Nested cells with text may appear outside the border in MS2004 | Conform; Reporting | 27/2/2013 |
| CADconform for MicroStation v7.01.52 | B-20132014 | Certifying files with undisplayed refs may invalidate watermark on reopening | Watermarking | 18/3/2013 |
| CADconform for MicroStation v7.01.51 | B-20132007 | Reprojected ref files may invalidate due to dimension differences in SS2 vs SS3 | Watermarking | 29/1/2013 |
| CADconform for MicroStation v7.01.51 | B-20132006 | Reprojected ref files may invalidate due to text node line spacing | Watermarking | 29/1/2013 |
| CADconform for MicroStation v7.01.51 | B-20132005 | Empty custom linestyles in nested ref files may cause immediate invalidation | Watermarking | 29/1/2013 |
| CADconform for MicroStation v7.01.51 | B-20132004 | Cells in reprojected ref files may cause immediate invalidation | Watermarking | 29/1/2013 |
| CADconform for MicroStation v7.01.50 | B-20122002 | Dimensions with missing styles may crash Conform | Conform | 21/12/2012 |
| CADconform for MicroStation v7.01.49 | B-20122001 | Font name may not initialise correctly when activated | Feature Table Editor | 13/12/2012 |
| CADconform for MicroStation v7.01.49 | B-20122000 | Cut & Paste into a child of the selection will delete the whole selection | Feature Table Editor | 12/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121999 | Working units may not be calculated correctly for some models | Conform; Reporting | 10/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121998 | Older databases with numbered fonts may crash on import | Feature Table Mgr | 6/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121997 | Elements beyond the clipping plane may be reported as outside border | Reporting | 5/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121996 | 3D files may zoom with an incorrect clipping plane depth | Conform | 4/12/2012 |
| CADconform for MicroStation v7.01.47 | B-20121995 | Non-MS fonts may get remapped when moving between models | Conform | 7/11/2012 |
| CADconform for MicroStation v7.01.46 | B-20121994 | Some dimension commands display 'command not defined' | Drafting Menu | 31/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121993 | Cells with custom linestyles may not match cache definition | Conform; Reporting | 29/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121992 | Dropped elements may not show a summary from the Detailed Error report | Reporting | 18/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121991 | Possible hang when deleting or dropping from Detailed Error report | Reporting | 16/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121990 | Corrupt cells in MicroStation 2004 may report as outside the border | Reporting | 16/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121989 | Conform preview may not show text elements centred correctly | Conform | 5/10/2012 |
| CADconform for MicroStation v7.01.45 | B-20121988 | Certify with fence warning persists after fence is cleared | Reporting; Watermarking | 1/10/2012 |
| CADconform for MicroStation v7.01.45 | B-20121987 | Small B-splines may not clip correctly in MicroStation 2004 | Reporting | 28/9/2012 |
| CADconform for MicroStation v7.01.45 | B-20121986 | The command to set the active dimension text style was not working | Drafting Menu | 21/9/2012 |
| CADconform for MicroStation v7.01.45 | B-20121985 | Older dictionaries do not recognise 'None' as the same as 'Style (None)' | Conform; Feature Table Editor; Reporting | 19/9/2012 |
| CADconform for MicroStation v7.01.43 | B-20121983 | Crash on certification with a plot border shape defined | Watermarking | 12/9/2012 |
| CADconform for MicroStation v7.01.42 | B-20121982 | Reprojected references may cause text size to fail conformance | Reporting | 31/8/2012 |
| CADconform for MicroStation v7.01.42 | B-20121981 | Elements overlapping ref clip may report as outside plot border | Reporting | 29/8/2012 |
| CADconform for MicroStation v7.01.42 | B-20121980 | Empty text nodes may report as outside clipping border in V8i | Conform; Reporting | 20/8/2012 |
| CADconform for MicroStation v7.01.42 | B-20121978 | Multi-string dimensions may not pick up overridden fonts | Conform | 16/8/2012 |
| CADconform for MicroStation v7.01.42 | B-20121977 | Placed notes may contain extension lines that cannot be fixed | Conform | 16/8/2012 |
| CADconform for MicroStation v7.01.41 | B-20121975 | Zoom may be inaccurate for shared cells in 3D files | Conform | 3/8/2012 |
| CADconform for MicroStation v7.01.41 | B-20121973 | Some complex headers may report as outside the border in MS2004 | Conform; Reporting | 30/7/2012 |
| CADconform for MicroStation v7.01.41 | B-20121972 | Multiline dimension font overriding is not detected in MS2004 | Conform; Reporting | 30/7/2012 |
| CADconform for MicroStation v7.01.41 | B-20121971 | Keyins are truncated at 1024 characters when drafting | Drafting Menu | 30/7/2012 |
| CADconform for MicroStation v7.01.40 | B-20121970 | Conform window has overlapping dialog items on clean install | Conform | 25/7/2012 |
| CADconform for MicroStation v7.01.40 | B-20121969 | Watermark invalidation on file open due to reprojected reference files | Watermarking | 25/7/2012 |
| CADconform for MicroStation v7.01.40 | B-20121909 | Draft-by-ranges was not setting symbology correctly for dimensions | Drafting Menu | 14/3/2012 |
| CADconform for MicroStation v7.01.40 | B-20121908 | AutoCAD reference files cause automatic invalidation of watermarks | Watermarking | 24/2/2012 |
| CADconform for MicroStation v7.01.38 | B-20121968 | Reference elements now obey clip masks prior to plot border checking | Reporting | 11/7/2012 |
| CADconform for MicroStation v7.01.38 | B-20121967 | B-splines and arcs may report as outside the border in MS2004 | Reporting | 11/7/2012 |
| CADconform for MicroStation v7.01.38 | B-20121966 | Missing title block errors may appear if the text overlaps the plot border | Conform; Reporting | 3/7/2012 |
| CADconform for MicroStation v7.01.38 | B-20121965 | There are no drafting commands for placing cells at X and Y axis angles | Drafting Menu | 2/7/2012 |
| CADconform for MicroStation v7.01.38 | B-20121964 | Placing a pattern cell should set the angle keyin as "PA" instead of "AA" | Drafting Menu; Feature Table Editor | 2/7/2012 |
| CADconform for MicroStation v7.01.37 | B-20121962 | New digital signatures could not be placed in MicroStation V8i | Digital Signatures | 29/6/2012 |
| CADconform for MicroStation v7.01.37 | B-20121961 | Digital signatures do not inherit the settings from existing watermarks | Digital Signatures; Watermarking | 29/6/2012 |
| CADconform for MicroStation v7.01.37 | B-20121960 | Suggested feature may not be accepted if the destination folder is not loaded | Suggest a Feature | 26/6/2012 |
| CADconform for MicroStation v7.01.37 | B-20121959 | Suggested features may place the sent message in the wrong sent folder | Suggest a Feature | 26/6/2012 |
| CADconform for MicroStation v7.01.36 | B-20121958 | Change/Change All may show zero changed complex elements | Conform | 21/6/2012 |
| CADconform for MicroStation v7.01.36 | B-20121957 | Crash when conforming nested orphan cells in MicroStation 2004 | Conform | 21/6/2012 |
| CADconform for MicroStation v7.01.35 | B-20121956 | Text styles with overrides may produce 100% match score in Conform | Conform | 18/6/2012 |
| CADconform for MicroStation v7.01.34 | B-20121955 | Drafting may produce spurious error message | Drafting Menu | 14/6/2012 |
| CADconform for MicroStation v7.01.33 | B-20121953 | Text of zero size may be reported as outside border | Conform | 12/6/2012 |
| CADconform for MicroStation v7.01.33 | B-20121952 | Text of zero size will zoom to (0,0) instead of correct text origin | Reporting | 12/6/2012 |
| CADconform for MicroStation v7.01.33 | B-20121951 | Possible crash in FTE if drop target matches same row as drag target | Feature Table Editor | 8/6/2012 |
| CADconform for MicroStation v7.01.33 | B-20121950 | The plot border cell is sometimes reported as being outside the plot border shape | Reporting | 8/6/2012 |
| CADconform for MicroStation v7.01.31 | B-20121949 | Defining a pre-certification keyin may cause a hang until the user presses RESET | Reporting | 29/5/2012 |
| CADconform for MicroStation v7.01.30 | B-20121930 | Synchronising tables may crash for database columns over 260 characters | Feature Table Mgr | 16/5/2012 |
| CADconform for MicroStation v7.01.30 | B-20121929 | Missing reference files may cause SQL error on some design file names | Reporting | 16/5/2012 |
| CADconform for MicroStation v7.01.30 | B-20121928 | Possible hang when using Conform-to on the Error List report | Reporting | 15/5/2012 |
| CADconform for MicroStation v7.01.30 | B-20121927 | Conform by fence or border shape is not reliable in 3D files | Conform; Reporting | 4/5/2012 |
| CADconform for MicroStation v7.01.28 | B-20121924 | Possible crash in cell caching when CSF files are used with cell libraries | Conform | 26/4/2012 |
| CADconform for MicroStation v7.01.28 | B-20121923 | Possible hang when a cell library contains an underscore and cell cache is on | Conform | 26/4/2012 |
| CADconform for MicroStation v7.01.27 | B-20121922 | PowerDraft with UAC enabled may not be able to create local client paths | Configuration | 25/4/2012 |
| CADconform for MicroStation v7.01.27 | B-20121921 | Conform may change text node size when size is not defined in standards | Conform | 25/4/2012 |
| CADconform for MicroStation v7.01.27 | B-20121920 | Conform may crash on orphan cells with thousands of components | Conform | 23/4/2012 |
| CADconform for MicroStation v7.01.26 | B-20121918 | Changing client version sometimes failed to update local config file | Configuration | 5/4/2012 |
| CADconform for MicroStation v7.01.26 | B-20121917 | Conform-to from Report Viewer may set text size incorrectly | Reporting | 5/4/2012 |
| CADconform for MicroStation v7.01.26 | B-20121916 | Text font is not applied in Conform-by-ranges | Conform | 5/4/2012 |
| CADconform for MicroStation v7.01.26 | B-20121915 | Some dimension types do not have their text size fixed | Conform | 4/4/2012 |
| CADconform for MicroStation v7.01.26 | B-20121914 | Cell components should not be ignored if cells are not checked | Conform | 4/4/2012 |
| CADconform for MicroStation v7.01.26 | B-20121913 | Report does not refresh drawing scale of master model on completion | Batch Processor; Reporting | 30/3/2012 |
| CADconform for MicroStation v7.01.26 | B-20121912 | Setting the dimension font by name does not work in the Drafting Menu | Drafting Menu | 30/3/2012 |
| CADconform for MicroStation v7.01.26 | B-20121911 | Dimensions in reference files interpret the text size using the master UORs | Reporting | 28/3/2012 |
| CADconform for MicroStation v7.01.25 | B-20121910 | Preference file path may be clipped if server install path is too long | Configuration; Installer | 20/3/2012 |
| CADconform for MicroStation v7.01.24 | B-20121906 | Draft-by-ranges does not update text colour in MicroStation V8i | Drafting Menu | 7/2/2012 |
| CADconform for MicroStation v7.01.24 | B-20121905 | CADconform hangs when invalidating legacy watermark | Watermarking | 7/2/2012 |
| CADconform for MicroStation v7.01.24 | B-20121904 | MicroStation build does not allow more than 4 Data-Fields per cell | Feature Table Editor | 6/2/2012 |
| CADconform for MicroStation v7.01.24 | B-20121903 | Crash when conforming cells with some dimension types ignoring font numbers | Conform | 25/1/2012 |
| CADconform for MicroStation v7.01.23 | B-20111902 | Conform does not support cells with nested anonymous DWG shared cell components | Conform | 23/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111901 | The report 'Conform To' tool does not support cell components | Reporting | 16/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111900 | Cancelling a batch report only cancels the current file operation | Reporting | 16/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111899 | Colour match scoring may crash if colour index is greater than 256 | Conform; Reporting | 15/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111898 | Spurious unmatched cell name may appear due to find file error | Conform; Reporting | 15/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111897 | Cell scale lock is only allowed in 3D files when choosing replacement cell | Conform | 13/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111896 | Cell definition checking may be inconsistent with point cells | Conform | 13/12/2011 |
| CADconform for MicroStation v7.01.21 | B-20111895 | Conform-to may not work on elements not located in the active model | Reporting | 6/12/2011 |
| CADconform for MicroStation v7.01.20 | B-20111892 | Network client install does not set correct CADconform share path | Installer | 18/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111891 | Multi-set symbology propagates the first level unnecessarily | Feature Table Editor | 18/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111890 | Spurious missing feature errors when reviewing suggested features | Conform | 17/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111889 | Shape features do not allow 'Conform To' on linear features in Reports | Reporting | 11/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111874 | Conforming text may change the alignment settings unnecessarily | Conform | 14/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111893 | Long delay on opening CADconform or Conform when MS_CELLLIST is large | Conform | 21/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111885 | Dimensions may show as removed as soon as the 'Change' button is pressed | Conform | 8/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111884 | Dimension annotation override cannot be disabled - partial fix | Conform | 7/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111883 | Selecting text to conform to may change the active text-style | Conform | 3/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111882 | Dimensions may show as removed as soon as the preview is shown | Conform | 8/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111881 | Dimension text weight may not be changed successfully in Conform | Conform | 1/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111880 | Dimension text-style may not be shown in Conform feature summary | Conform | 1/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111879 | Text-style mismatch may not be scored correctly in Conform | Conform | 31/10/2011 |
| CADconform for MicroStation v7.01.19 | B-20111878 | Text-styles may inherit the incorrect font if conformed to a DGNLIB text-style | Conform | 3/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111876 | Conforming cells may enable locked scale if drawing scale window is opened | Conform | 27/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20101692 | Rotated watermarks cause incorrect invalidation slash | Watermarking | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111875 | Drafting menu becomes unresponsive when the FTE window is closed | Drafting Menu; Feature Table Editor | 27/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111865 | The Change Feature Table option does not allow rebranding of branded files | Conform; Drafting Menu | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111864 | Deleting all rows should be disabled if multiple tables are loaded | Feature Table Editor | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111863 | Deleting all rows makes the FTE not able to export until restarted | Feature Table Editor | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111862 | Report may produce spurious marker/watermark errors | Watermarking | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111861 | Double-cross on report fail option always shows ON even when OFF | Preferences | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111860 | String filter does not update feature list when resizing | Drafting Menu | 6/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111859 | String filter does not clear when drafting menu is shrunk to hide it | Drafting Menu | 6/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111858 | Drafting to 'dimension style: none' does not work | Drafting Menu | 5/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111857 | Crash when exporting either CSV or TXT report but not both | Batch Processor | 5/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111856 | HTML Report may not show colour ranges if the primary colour is ByLevel | HTML Reports | 15/9/2011 |
| CADconform for MicroStation v7.01.18 | B-20111855 | Draft-by-ranges may not show a custom linestyle ByLevel if it hasn't been placed | Conform; Drafting Menu | 14/9/2011 |
| CADconform for MicroStation v7.01.17 | B-20111854 | Symbology ranges show active ByLevel settings, not the current feature level | Feature Table Editor | 30/8/2011 |
| CADconform for MicroStation v7.01.17 | B-20111853 | Choose cell dialog may pop up unexpectedly during Conforming | Conform | 30/8/2011 |
| CADconform for MicroStation v7.01.17 | B-20111852 | Possible crash when switching branded DGNs with drafting menu open | Drafting Menu | 25/8/2011 |
| CADconform for MicroStation v7.01.17 | B-20111851 | DWG Hatching may make cell definition checking fail | Conform | 25/8/2011 |
| CADconform for MicroStation v7.01.17 | B-20111850 | Cells containing nested shared cells may not pass cell definition checking | Conform | 25/8/2011 |
| CADconform for MicroStation v7.01.17 | B-20111849 | 3D cells may not match on definition when cell cache is enabled | Conform | 25/8/2011 |
| CADconform for MicroStation v7.01.17 | B-20111848 | Changing the level or linestyle toggles may cause a crash | Feature Table Editor | 25/8/2011 |
| CADconform for MicroStation v7.01.16 | B-20111847 | Replacing dimensions may reset the master/sub unit overrides | Conform | 23/8/2011 |
| CADconform for MicroStation v7.01.16 | B-20111846 | Background batch processing clears the current user's password | Batch Processor | 15/8/2011 |
| CADconform for MicroStation v7.01.15 | B-20111845 | Colour table remapping was not using the correct values for the new table | Conform | 10/8/2011 |
| CADconform for MicroStation v7.01.15 | B-20111844 | Conform cannot fix a colour table if the capability is disabled by the workspace | Conform | 10/8/2011 |
| CADconform for MicroStation v7.01.14 | B-20111843 | Dimension font colour may not conform correctly for named dimension styles | Conform | 28/7/2011 |
| CADconform for MicroStation v7.01.14 | B-20111834 | Cannot apply new dimension style to previous unnamed dimension style | Conform | 28/7/2011 |
| CADconform for MicroStation v7.01.13 | B-20111842 | Automatic copying of Data Fields may replace text contents unnecessarily | Conform; Reporting | 26/7/2011 |
| CADconform for MicroStation v7.01.13 | B-20111841 | Possible crash when checking dimensions with zero stack offset | Conform; Reporting | 26/7/2011 |
| CADconform for MicroStation v7.01.13 | B-20111840 | Possible crash with many branded tables in one design file | Feature Table Mgr | 13/7/2011 |
| CADconform for MicroStation v7.01.13 | B-20111838 | Cached cells may not be found when wildcards are used in MS_CELLLIST | Conform | 11/7/2011 |
| CADconform for MicroStation v7.01.13 | B-20111837 | Cached cells may repopulate for every conform operation | Conform | 11/7/2011 |
| CADconform for MicroStation v7.01.12 | B-20111830 | ByLevel values may result in a match score above 100% | Conform | 8/6/2011 |
| CADconform for MicroStation v7.01.12 | B-20111836 | Don't check design file name for self-attached reference files | Reporting | 4/7/2011 |
| CADconform for MicroStation v7.01.12 | B-20111835 | Reporting within a fence should disable the check inside plot boundary | Reporting | 4/7/2011 |
| CADconform for MicroStation v7.01.12 | B-20111833 | Dimensions with no text may cause a crash when checking | Conform | 1/7/2011 |
| CADconform for MicroStation v7.01.11 | B-20111829 | Cached cell files containing text require deletion to conform properly | Conform | 25/5/2011 |
| CADconform for MicroStation v7.01.11 | B-20111828 | CADconform may not display all icons if updated from the server automatically | Tool Palettes | 25/5/2011 |
| CADconform for MicroStation v7.01.11 | B-20111832 | Scan for elements outside border does not obey ref file clipping | Reporting | 28/6/2011 |
| CADconform for MicroStation v7.01.10 | B-20111827 | Conform preview may not show text with missing font correctly | Conform | 10/5/2011 |
| CADconform for MicroStation v7.01.10 | B-20111826 | Conform preview may not show element with zero width or height | Conform | 10/5/2011 |
| CADconform for MicroStation v7.01.07 | B-20111825 | Branded disallowed tables do not always display as an error | Branding; Feature Table Mgr | 9/5/2011 |
| CADconform for MicroStation v7.01.07 | B-20111824 | Adding a suggested feature may cause a crash | Conform | 6/5/2011 |
| CADconform for MicroStation v7.01.07 | B-20111823 | Checking cell score may create endless loop in Conform | Conform | 6/5/2011 |
| CADconform for MicroStation v7.01.07 | B-20111822 | Setting the active text slant in V8i was overriding other text settings | Drafting Menu | 5/5/2011 |
| CADconform for MicroStation v7.01.06 | B-20111820 | Conform hide button may hide all elements for numeric named levels | Conform | 21/4/2011 |
| CADconform for MicroStation v7.01.06 | B-20111819 | Copy/paste may reverse order of features | Feature Table Editor | 20/4/2011 |
| CADconform for MicroStation v7.01.06 | B-20111818 | Dimension line symbology may report as incorrect | Conform | 20/4/2011 |
| CADconform for MicroStation v7.01.06 | B-20111817 | Some watermark cells may cause immediate invalidation | Watermarking | 19/4/2011 |
| CADconform for MicroStation v7.01.05 | B-20111791 | Possible crash when reading dimensions with a missing font | Conform | 11/4/2011 |
| CADconform for MicroStation v7.01.05 | B-20111790 | CADconform update may not write out local config file properly | Configuration | 5/4/2011 |
| CADconform for MicroStation v7.01.05 | B-20111789 | Possible crash when conforming text with a missing font | Conform | 22/3/2011 |
| CADconform for MicroStation v7.01.05 | B-20111788 | Cache files may refuse to load for feature tables with 26 entries | Databases | 21/3/2011 |
| CADconform for MicroStation v7.01.04 | B-20111787 | Possible crash on conforming of text with size ranges | Conform | 14/3/2011 |
| CADconform for MicroStation v7.01.04 | B-20111786 | Correct cell name is not selected when the cell selector dialog is opened | Conform | 14/3/2011 |
| CADconform for MicroStation v7.01.04 | B-20111784 | Resizing of group-boxes does not repaint the screen properly | Preferences | 15/2/2011 |
| CADconform for MicroStation v7.01.04 | B-20111783 | Text colour may not be set correctly | Conform | 15/2/2011 |
| CADconform for MicroStation v7.01.04 | B-20111781 | Crash when synchronising an external SQL Server database | Databases | 9/2/2011 |
| CADconform for MicroStation v7.01.04 | B-20111780 | Settings will not be saved if a previous save file is not found | Other | 9/2/2011 |
| CADconform for MicroStation v7.01.04 | B-20111779 | Conform preview does not show details for zero sized elements | Conform | 1/2/2011 |
| CADconform for MicroStation v7.01.04 | B-20111778 | Colour table prompt appears when colour table can't be fixed (e.g. DWG mode) | Conform | 1/2/2011 |
| CADconform for MicroStation v7.01.04 | B-20111777 | The cell library path may be clipped if a matching file exists in the MS_CELL path | Feature Table Editor; User Manager | 31/1/2011 |
| CADconform for MicroStation v7.01.04 | B-20111776 | Watermark text substitution may sometimes fail | Watermarking | 29/1/2011 |
| CADconform for MicroStation v7.01.03 | B-20111775 | Possible crash when watermarking with substituted watermark text | Watermarking | 28/1/2011 |
| CADconform for MicroStation v7.01.03 | B-20111774 | Removing watermarks may still trigger a watermark invalidation warning | Watermarking | 28/1/2011 |
| CADconform for MicroStation v7.01.02 | B-20111773 | Dimension text size may be erroneously matched with '1.0' size | Conform | 25/1/2011 |
| CADconform for MicroStation v7.01.02 | B-20111772 | Improved granularity of match scoring of text and cell scales | Conform | 25/1/2011 |
| CADconform for MicroStation v7.01.02 | B-20111771 | Conform may crash when checking an activated reference file | Conform | 20/1/2011 |
| CADconform for MicroStation v7.01.02 | B-20111770 | Dimensions with edited and overridden text settings may not be detected | Conform | 27/1/2011 |
| CADconform for MicroStation v7.01.02 | B-20111769 | Conform-by-ranges dialog may cause crash if no dimension styles defined | Conform | 10/1/2011 |
| CADconform for MicroStation v7.01.02 | B-20111768 | Crash when switching models and fixing colour tables | Conform | 10/1/2011 |
| CADconform for MicroStation v7.01.01 | B-20101767 | Dimensions with 'no style' defined cannot be conformed | Conform | 28/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101766 | Branding should not switch tables when the FTE is open | Branding; Feature Table Editor | 29/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101765 | Potential crash in the login dialog when user groups are not defined | Login | 17/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101763 | Windows authentication failure may prevent group login from succeeding | Login | 16/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101762 | Tool boxes may open the first time with zero width/height | Tool Palettes | 17/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101761 | The option to disallow user defined drawing scales does not work | Conform | 13/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101759 | Conforming a text node with no text height set may cause a crash | Conform | 10/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101758 | Restarting Conform may prompt for 'Next' unnecessarily | Conform | 10/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101757 | Batch processing of branded DGNs may produce database warning | Batch Processor | 9/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101756 | Conforming colour tables in sheet models may not fix background colour | Conform | 9/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101755 | Crash when saving DWG to DGN with incorrect colour tables | Conform | 8/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101754 | Colour table prompts may reappear multiple times when a read-only file is opened | Conform | 8/12/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101752 | Show used features will show features nested in cells | Drafting Menu | 2/12/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101748 | Switching branded DGNs in the report viewer may produce report warning | Reporting | 26/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101747 | Text output from reports produces spurious error when no output path defined | Reporting | 25/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101746 | The Batch Unbranding command does not work | Branding | 24/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101745 | Auto-start option may not work | Configuration | 24/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101742 | The feature filter may not show used features that are not level-checked | Drafting Menu | 15/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101713 | Conform match scoring does not sort single digits below double digits | Conform | 5/10/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101712 | CSV import does not support element types ranges without square brackets | Feature Table Editor | 27/9/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101702 | Text size may change on Conform when size is not specified | Conform | 17/8/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101701 | Replacing a cell may make hidden levels visible | Conform | 16/8/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101694 | Tables that are not allowed are hidden from administrators if branding is present | Branding; Configuration | 30/7/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101693 | Branded design files may prompt for the tables unnecessarily | Branding | 30/7/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101691 | B-spline knots may appear to be on the wrong level in a cell | Conform | 29/7/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101690 | Importing tables from DICT file showed double the number of features | Feature Table Mgr | 28/7/2010 |
| CADconform for MicroStation v7.01.00 | B-20101753 | Conform dialog resizes incorrectly in XM with >= 12 pt font | Conform | 3/12/2010 |
| CADconform for MicroStation v7.01.00 | B-20101751 | Showing used features may ignore some cells | Drafting Menu | 1/12/2010 |