| Fixed in Version | Bug: Bug # | Summary | Tool | Date Fixed |
|---|
| CADconform for MicroStation v8.00.81 | B-20192349 | Exporting an XLS report when the file existed may cause a crash | Databases | 2/08/2019 |
| CADconform for MicroStation v8.00.81 | B-20192350 | Exporting to Excel did not work with 32-bit ACE drivers | Databases | 2/08/2019 |
| CADconform for MicroStation v8.00.80 | B-20192347 | Upgrading old databases would sometimes show an SQL error | Databases | 5/07/2019 |
| CADconform for MicroStation v8.00.79 | B-20192344 | Checking on levels from Last View would sometimes fail | Conform; Reporting | 30/01/2019 |
| CADconform for MicroStation v8.00.79 | B-20192346 | US text sizes containing apostrophes can cause SQL errors | Reporting | 14/06/2019 |
| CADconform for MicroStation v8.00.78 | B-20192343 | Some reporting columns would be blank if values exceeded +-10 million | File History; Reporting | 25/01/2019 |
| CADconform for MicroStation v8.00.78 | B-20192342 | The weight and style report column options are transposed | File History; Reporting | 25/01/2019 |
| CADconform for MicroStation v8.00.77 | B-20182338 | Report Viewer may crash with > 66,000 error rows | View Reports | 21/12/2018 |
| CADconform for MicroStation v8.00.77 | B-20192341 | Empty files caused the Design File Histogram to crash | File History | 15/01/2019 |
| CADconform for MicroStation v8.00.77 | B-20182337 | Mismatched text with zero size may report during Certify but not during Reporting | Reporting | 18/12/2018 |
| CADconform for MicroStation v8.00.77 | B-20192340 | Levels beginning with a lower case letter may not be retained by the selection | Reporting | 15/01/2019 |
| CADconform for MicroStation v8.00.76 | B-20182335 | Preferences were erroneously saved with quotes around weighting integers | Conform | 9/10/2018 |
| CADconform for MicroStation v8.00.75 | B-20182334 | Some cells with patterning may not match cell library definition | Conform | 4/10/2018 |
| CADconform for MicroStation v8.00.75 | B-20182332 | Orphan cell components are no longer skipped when Feature Summary is OFF | Reporting | 1/10/2018 |
| CADconform for MicroStation v8.00.75 | B-20182333 | Named cells may be reported as errors twice at the same FilePos in the detail report | Reporting | 1/10/2018 |
| CADconform for MicroStation v8.00.74 | B-20182331 | Border sheets no longer require a saved drawing scale | Reporting | 12/09/2018 |
| CADconform for MicroStation v8.00.73 | B-20182330 | Cell components may show as errors after changing cell symbology in Conform | Conform | 12/09/2018 |
| CADconform for MicroStation v8.00.72 | B-20182329 | CSV importing may ignore some ranges and values | CSV Importing | 28/08/2018 |
| CADconform for MicroStation v8.00.71 | B-20182322 | ByLevel linestyle does not display in ranges when the level does not exist | Conform-by-Ranges; Draft-by-Ranges | 10/05/2018 |
| CADconform for MicroStation v8.00.71 | B-20182320 | Tag values could not be defined for some tag definition names | Feature Table Editor | 28/06/2016 |
| CADconform for MicroStation v8.00.71 | B-20182321 | Draft & Conform by ranges toggle may be disabled incorrectly | Conform-by-Ranges; Draft-by-Ranges | 8/05/2018 |
| CADconform for MicroStation v8.00.71 | B-20182319 | Report naming may fail if the template is the same length as the embedded macro | Reporting | 12/04/2018 |
| CADconform for MicroStation v8.00.71 | B-20182326 | Automatic brand renaming does not work when the database name is the only change | Branding | 13/07/2018 |
| CADconform for MicroStation v8.00.71 | B-20182325 | Command features may be missing keyin commands | Feature Table Editor | 20/08/2018 |
| CADconform for MicroStation v8.00.69 | B-20182317 | The reporting database is not reattached after reference branding | Feature Table Mgr | 6/04/2018 |
| CADconform for MicroStation v8.00.68 | B-20182315 | Text styles defined in reference files may not summarise onto the same report row | Reporting | 3/04/2018 |
| CADconform for MicroStation v8.00.68 | B-20182316 | Renaming an existing feature table might fail | Feature Table Mgr | 6/04/2018 |
| CADconform for MicroStation v8.00.66 | B-20182314 | Regional settings for Germany may cause SQL errors in reports | Reporting | 30/03/2018 |
| CADconform for MicroStation v8.00.66 | B-20182312 | Level names that were numbers may not retain selection in listbox | Conform; Reporting | 28/03/2018 |
| CADconform for MicroStation v8.00.66 | B-20182313 | Text styles defined in reference files may not match correctly | Reporting | 28/03/2018 |
| CADconform for MicroStation v8.00.66 | B-20182311 | Level selector may not show used reference levels in bold | Conform; Reporting | 27/03/2018 |
| CADconform for MicroStation v8.00.66 | B-20182318 | Windows user names containing apostrophes may cause SQL errors | Reporting | 12/04/2018 |
| CADconform for MicroStation v8.00.66 | B-20182310 | JET drivers do not fully support table names containing apostrophes | Reporting | 20/03/2018 |
| CADconform for MicroStation v8.00.65 | B-20182309 | Possible string buffer overflow caused by long database driver error messages | Databases | 16/03/2018 |
| CADconform for MicroStation v8.00.64 | B-20182307 | Feature solids may show an error on the control level (level 0) | Conform; Reporting | 14/02/2018 |
| CADconform for MicroStation v8.00.64 | B-20182308 | Hatch components may ignore hatch settings check if unknown cells are allowed | Conform; Reporting | 15/02/2018 |
| CADconform for MicroStation v8.00.63 | B-20172306 | Possible crash when generating a histogram with > 8 watermarks | File History | 11/12/2017 |
| CADconform for MicroStation v8.00.61 | B-20172305 | Watermarks may invalidate when switching models in the same DGN file | Watermarking | 23/11/2017 |
| CADconform for MicroStation v8.00.61 | B-20172304 | Possible buffer overflow reading features with keyins > 1024 characters | Feature Table Editor | 13/11/2017 |
| CADconform for MicroStation v8.00.60 | B-20172303 | Rendering the Cell Selector images would sometimes corrupt memory | Cell Selector | 26/10/2017 |
| CADconform for MicroStation v8.00.60 | B-20172300 | Complex linear elements with B-splines may not fully conform | Conform | 24/10/2017 |
| CADconform for MicroStation v8.00.60 | B-20172301 | Fixed crash when the string filter clear icon was pressed | Cell Selector | 26/10/2017 |
| CADconform for MicroStation v8.00.60 | B-20172302 | The Regenerate Images button was clearing files from the wrong path | Cell Selector | 26/10/2017 |
| CADconform for MicroStation v8.00.59 | B-20172298 | Fixed possible memory corruption with finding files | Configuration | 5/10/2017 |
| CADconform for MicroStation v8.00.59 | B-20172299 | Fixed crash when a string filter was left active on dialog close | Cell Selector | 16/10/2017 |
| CADconform for MicroStation v8.00.58 | B-20172297 | Fixed crash with automatic report name generation | Reporting | 5/10/2017 |
| CADconform for MicroStation v8.00.57 | B-20172296 | Branding multiple files may cause a crash | Feature Table Mgr | 4/09/2017 |
| CADconform for MicroStation v8.00.56 | B-20172294 | Reprojected ref files may report elements outside border | Reporting | 28/08/2017 |
| CADconform for MicroStation v8.00.56 | B-20172295 | Background colour "BG" is not supported in the colour range string | Conform; Reporting | 28/08/2017 |
| CADconform for MicroStation v8.00.55 | B-20172293 | Watermark report may cause MicroStation to hang | Reporting | 15/08/2017 |
| CADconform for MicroStation v8.00.54 | B-20172292 | The cell preview may sometimes fail to render at all | Cell Selector; Conform | 10/08/2017 |
| CADconform for MicroStation v8.00.54 | B-20172291 | The choose cell dialog scale lock may not be changeable | Cell Selector; Conform | 10/08/2017 |
| CADconform for MicroStation v8.00.53 | B-20172290 | Locked tables are not bypassing the Feature Table Manager | Feature Table Mgr | 22/06/2017 |
| CADconform for MicroStation v8.00.53 | B-20172288 | Locked tables are not automatically loaded | Feature Table Mgr; User Manager | 22/06/2017 |
| CADconform for MicroStation v8.00.53 | B-20172284 | Wildcards were not working when the type was set to < 4 | Other | 19/06/2017 |
| CADconform for MicroStation v8.00.53 | B-20172285 | Automatic display of undisplayed levels in Conform did not work | Conform | 21/06/2017 |
| CADconform for MicroStation v8.00.53 | B-20172286 | Updating branding does not disable feature tables that are not allowed | Conform | 21/06/2017 |
| CADconform for MicroStation v8.00.53 | B-20172287 | The current user is not selected when the User Manager is opened | User Manager | 21/06/2017 |
| CADconform for MicroStation v8.00.52 | B-20172283 | Linestyle control elements may flag as errors when allowing unknown cells | Conform; Reporting | 6/06/2017 |
| CADconform for MicroStation v8.00.52 | B-20172282 | The replacement cell checksum was not consistent in the Conform Preview | Conform | 6/06/2017 |
| CADconform for MicroStation v8.00.51 | B-20172280 | Some commands on the User Manager may not launch correctly | User Manager | 31/05/2017 |
| CADconform for MicroStation v8.00.51 | B-20172281 | Fixed possible crash when editing the File DSNs | User Manager | 31/05/2017 |
| CADconform for MicroStation v8.00.50 | B-20142050 | Manually placing marker cells in a reference file causes invalidation | Watermarking | 22/05/2017 |
| CADconform for MicroStation v8.00.50 | B-20172279 | Reference files may be added as duplicated master models in report | Batch Processor; Reporting | 23/05/2017 |
| CADconform for MicroStation v8.00.49 | B-20172278 | The choose cell preview window shows '(Empty text)' in Conform | Conform | 18/05/2017 |
| CADconform for MicroStation v8.00.48 | B-20172277 | Database may truncate user keyin after first character | Databases | 11/04/2017 |
| CADconform for MicroStation v8.00.48 | B-20172276 | Exporting multiple tables to HTML may not work from the FTE window | Feature Table Editor | 7/04/2017 |
| CADconform for MicroStation v8.00.47 | B-20172275 | View Preferences may not display the active settings correctly | Preferences | 4/04/2017 |
| CADconform for MicroStation v8.00.47 | B-20172273 | Crash when manually exporting a report to a text file | Reporting | 3/04/2017 |
| CADconform for MicroStation v8.00.47 | B-20172274 | Crash when using scan period on a model with multiple watermarks | Reporting | 3/04/2017 |
| CADconform for MicroStation v8.00.46 | B-20172272 | Intermittent crash when auto-exporting text or CSV reports | Reporting | 31/03/2017 |
| CADconform for MicroStation v8.00.46 | B-20172270 | ProjectWise Managed Workspaces produce an undefined symbol error | Configuration | 20/03/2017 |
| CADconform for MicroStation v8.00.45 | B-20172269 | MicroStation-based platforms might be toggled ON when not installed | Installer | 15/02/2017 |
| CADconform for MicroStation v8.00.45 | B-20172267 | Dimension scale now gets reset to 1 after Change-All operation | Conform | 10/02/2017 |
| CADconform for MicroStation v8.00.45 | B-20172266 | Markers and watermarks are found in undisplayed reference files | Watermarking | 8/02/2017 |
| CADconform for MicroStation v8.00.45 | B-20172265 | Markers and watermarks are found when reference-clipped | Watermarking | 8/02/2017 |
| CADconform for MicroStation v8.00.45 | B-20172268 | Current scale may not be set correctly when conforming by ranges in Reports | Conform-by-Ranges; Conform-by-Report | 14/02/2017 |
| CADconform for MicroStation v8.00.45 | B-20172264 | Possible crash when switching branded models with Draft Menu open | Drafting Menu | 6/02/2017 |
| CADconform for MicroStation v8.00.42 | B-20172262 | Socket errors connecting to ALS may cause a buffer overflow | Licensing | 5/01/2017 |
| CADconform for MicroStation v8.00.40 | B-20162257 | The batch processing command reports 'Command not defined' | Batch Processor | 22/11/2016 |
| CADconform for MicroStation v8.00.40 | B-20162258 | Design file paths containing em-dash are not supported | API; Batch Processor; Reporting | 22/11/2016 |
| CADconform for MicroStation v8.00.40 | B-20162259 | Setting the dimension level when Drafting has no effect | Draft-by-Ranges; Drafting Menu | 25/11/2016 |
| CADconform for MicroStation v8.00.39 | B-20162254 | Manually entering the eval licence details doesn't work | Licensing | 15/11/2016 |
| CADconform for MicroStation v8.00.39 | B-20162256 | Text nodes with difference line-spacing types might not be found | Conform | 17/11/2016 |
| CADconform for MicroStation v8.00.39 | B-20162255 | Certification is skipping checking of reference files | Watermarking | 17/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162253 | The Report Viewer may re-order the secondary sort column on mouse-click | Reporting | 9/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162248 | The password file was not written out correctly, resulting in spurious errors | User Manager | 7/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162247 | Some file path config variables do not read correctly | Configuration | 4/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162251 | Intermittent problem with SQL strings containing extraneous data | Reporting | 8/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162252 | Reporting does not support file/model names defined using Perl regex's | Reporting | 9/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162250 | Feature summary may report errors for cells with mismatched components | Reporting | 7/11/2016 |
| CADconform for MicroStation v8.00.38 | B-20162249 | Zoom in 3D files may set the view clipping plane past the element | Conform; Reporting | 7/11/2016 |
| CADconform for MicroStation v8.00.36 | B-20162241 | Fixed incorrect icon display when ByLevel value is incorrectly set to -1 | Reporting | 19/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162242 | Conform/Draft now updates ByLevel correctly when supported in ranges | Conform | 19/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162243 | Dimension style names were not matched correctly | Reporting | 20/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162240 | Possible string buffer overflow on extraction of computer name | Licensing | 4/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162244 | Some dimension settings were not shown to 3 significant figures | Reporting | 20/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162246 | The Find Feature tool may fail for orphan cell components | Reporting | 25/10/2016 |
| CADconform for MicroStation v8.00.36 | B-20162245 | The Find Feature tool may fail for elements with 24-bit colours defined | Reporting | 20/10/2016 |
| CADconform for MicroStation v8.00.35 | B-20162239 | Disabling the automatic adding of reference file may not work | Reporting | 9/09/2016 |
| CADconform for MicroStation v8.00.35 | B-20162238 | Conform show/hide may not work | Conform | 1/09/2016 |
| CADconform for MicroStation v8.00.34 | B-20162237 | Tags missing the associated element may not conform | Conform | 22/08/2016 |
| CADconform for MicroStation v8.00.33 | B-20162234 | Possible crash when certifying with replacement watermark text | Reporting | 19/08/2016 |
| CADconform for MicroStation v8.00.32 | B-20162233 | Possible crash when conforming multi-lined text nodes | Conform | 15/08/2016 |
| CADconform for MicroStation v8.00.30 | B-20162224 | String buffer overflow when reading long qualified CSV fields | CSV Importing | 18/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162225 | CSV linestyle ranges over 64 characters are ignored | CSV Importing | 19/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162227 | The signature and title block cell libraries are not read correctly | Configuration | 19/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162226 | Possilbe string index error when reading empty CSV fields | CSV Importing | 19/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162229 | The cell cache does not support cell library paths containing a comma | Conform; Reporting | 21/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162230 | Conform cannot replace cells on non-existent levels | Conform | 21/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162228 | Import CSV feature/elements type column may be overridden | CSV Importing | 21/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162231 | Conform only displays up to 2 rows of file names to conform to | Conform | 22/07/2016 |
| CADconform for MicroStation v8.00.30 | B-20162232 | Some smart surfaces are not recognised as valid 3D Objects | Conform; Reporting | 8/08/2016 |
| CADconform for MicroStation v8.00.29 | B-20162219 | Group login now retrieves the Windows user full name instead of login ID | Login | 28/06/2016 |
| CADconform for MicroStation v8.00.29 | B-20162220 | Possible crash when checking custom linestyles | Conform | 28/06/2016 |
| CADconform for MicroStation v8.00.29 | B-20162221 | Improved unicode support for Chinese characters | Conform | 28/06/2016 |
| CADconform for MicroStation v8.00.29 | B-20162222 | Listbox docking height is correct on startup when NET docked left/right | Drafting Menu | 12/07/2016 |
| CADconform for MicroStation v8.00.29 | B-20162223 | CADconform toolbox does not retain vertical docking between sessions | Tool Palettes | 12/07/2016 |
| CADconform for MicroStation v8.00.28 | B-20162218 | Some configuration variables were clipped to 256 characters | Configuration | 27/06/2016 |
| CADconform for MicroStation v8.00.27 | B-20162216 | Fixed read buffer overflow when certifying design files | View Reports; Watermarking | 17/06/2016 |
| CADconform for MicroStation v8.00.27 | B-20162217 | Smart Solids and Meshes may not report level or symbology correctly | Conform; Reporting | 17/06/2016 |
| CADconform for MicroStation v8.00.26 | B-20172271 | Opening a feature table may cause an exception error | Feature Table Mgr | 15/06/2016 |
| CADconform for MicroStation v8.00.25 | B-20162215 | 3D Solids use the symbology of the header, instead of the components | Conform; Reporting | 10/06/2016 |
| CADconform for MicroStation v8.00.25 | B-20162213 | Potential stack corruption bug when recursing variable argument lists | Conform; Reporting | 2/06/2016 |
| CADconform for MicroStation v8.00.25 | B-20162214 | Client version update may not work if set at the project level or higher | Configuration | 9/06/2016 |
| CADconform for MicroStation v8.00.23 | B-20162212 | Cache files made under V8i SS3 may fail to match when read on SS4 | Conform; Reporting | 24/05/2016 |
| CADconform for MicroStation v8.00.22 | B-20152149 | After opening a new model, the watermarking cell library remains attached | Watermarking | 16/05/2016 |
| CADconform for MicroStation v8.00.22 | B-20162210 | Prompt for marker cell placement has now been removed | Drafting Menu; Reporting | 16/05/2016 |
| CADconform for MicroStation v8.00.22 | B-20162211 | Fixed possible endless loop when opening feature tables with Text Styles | Feature Table Editor | 18/05/2016 |
| CADconform for MicroStation v8.00.22 | B-20162260 | One machine may check out two licences from the pool | Licensing | 14/12/2016 |
| CADconform for MicroStation v8.00.21 | B-20162235 | Pooled licences that fail maintenance / product / dept check may be retained | Licensing | 1/04/2016 |
| CADconform for MicroStation v8.00.21 | B-20162209 | Selected rows in XM may not be legible if set to hidden | Login | 13/05/2016 |
| CADconform for MicroStation v8.00.21 | B-20162208 | Sometimes the login password would not be recorded correctly | Login | 13/05/2016 |
| CADconform for MicroStation v8.00.21 | B-20162207 | Tabbing out of the user name was not always setting the focus to the password | Login | 11/04/2016 |
| CADconform for MicroStation v8.00.18 | B-20162204 | The fix ranges option may remain disabled in Conform | Conform | 25/02/2016 |
| CADconform for MicroStation v8.00.17 | B-20162202 | Invisible elements may cause parts of the file to not be certified | Watermarking | 24/02/2016 |
| CADconform for MicroStation v8.00.17 | B-20162203 | The Verify Watermark tool may not invalidate if Instant Invalidation is OFF | Watermarking | 24/02/2016 |
| CADconform for MicroStation v8.00.16 | B-20162199 | Rotated text-nodes may lose rotation on conforming | Conform | 15/02/2016 |
| CADconform for MicroStation v8.00.16 | B-20162200 | Potential memory corruption when finding cell libraries or design files | Batch Processor | 15/02/2016 |
| CADconform for MicroStation v8.00.16 | B-20162201 | Reference files may be inserted at the wrong location in the report list | Batch Processor | 15/02/2016 |
| CADconform for MicroStation v8.00.16 | B-20162198 | Crash when attempting to change a feature locked to a different model | Conform | 15/02/2016 |
| CADconform for MicroStation v8.00.15 | B-20152193 | Cells with scale lock on should default to the same scale for each axis | Conform | 23/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20152192 | Conform-to may replace components of named cells erroneously | Conform-by-Report | 21/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20162236 | Maintenance expiry date may show an invalid string in MicroStation XM | Licensing | 11/01/2016 |
| CADconform for MicroStation v8.00.15 | B-20152191 | Scale discrepancy between balloon help and text in Conform | Conform | 17/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20162196 | The level picker may not display all levels in master of DGNLIB models | Conform; Reporting | 5/01/2016 |
| CADconform for MicroStation v8.00.15 | B-20152190 | Possible crash when auto-fetching references from a non-border model | Reporting | 2/12/2015 |
| CADconform for MicroStation v8.00.15 | B-20162195 | Conform-to may not work across different models or design files | Conform-by-Report | 4/01/2016 |
| CADconform for MicroStation v8.00.15 | B-20152194 | The active scale is sometimes factored in when the toggle is OFF | Drawing Scale | 30/12/2015 |
| CADconform for MicroStation v8.00.13 | B-20152189 | Crash when conforming certain text nodes | Conform | 19/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152187 | Report icon colours may show incorrectly after a file compress | View Reports | 8/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152186 | Text rotation of the first error is applied to all subsequent text in Change All | Conform | 8/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152185 | Dimension scale is applied to all elements with differing scales | Conform | 8/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152183 | Text rotation applies the first defined angle to all text node components | Conform | 7/10/2015 |
| CADconform for MicroStation v8.00.12 | B-20152188 | Error scale is calculated incorrectly when conforming from the Report | View Reports | 8/10/2015 |
| CADconform for MicroStation v8.00.11 | B-20152182 | Only call the drawing scale custom command when a new scale is saved | Drawing Scale | 29/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152180 | Linear and shape icons show as white in MicroStation V8i menus | Drafting Menu; Feature Table Editor | 25/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152181 | The separator icon does not display in the list-box | Drafting Menu; Feature Table Editor | 25/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152179 | Spurious errors about text size may appear when using multiscales | Conform-by-Ranges | 23/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152178 | Conforming from the report does not tally text components of nodes | Reporting | 22/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152176 | Line spacing error scale was causing discrepancies between Find and Conform | Reporting | 18/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152175 | Problems with exporting multiple dictionaries in the FTE | Feature Table Editor | 16/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152177 | Setting the class or graphic group of text nodes doesn't set the components | Conform | 18/09/2015 |
| CADconform for MicroStation v8.00.11 | B-20152174 | The tab page list is still shown when the preview is turned off | Conform | 11/09/2015 |
| CADconform for MicroStation v8.00.10 | B-20152162 | Cells containing note dimensions may report as differing from library | Conform; Reporting | 27/07/2015 |
| CADconform for MicroStation v8.00.10 | B-20152170 | Selecting all design rows to set reporting levels may reset the level selection to '<ALL>' | Reporting | 18/08/2015 |
| CADconform for MicroStation v8.00.10 | B-20152171 | Setting reporting levels may not work if levels are defined only in references | Reporting | 18/08/2015 |
| CADconform for MicroStation v8.00.10 | B-20152169 | Processing multiple rows with 1 element may produce spurious warning | Reporting | 13/08/2015 |
| CADconform for MicroStation v8.00.10 | B-20152167 | ByLevel icon colours may show incorrectly when switching reporting models | Reporting | 11/08/2015 |
| CADconform for MicroStation v8.00.10 | B-20152168 | Magenta rows are difficult to read when selection turns them white | Conform | 11/08/2015 |
| CADconform for MicroStation v8.00.10 | B-20152165 | The conform change preview image applies the drawing scale twice | Conform | 7/08/2015 |
| CADconform for MicroStation v8.00.10 | B-20152166 | Dimensions and notes cannot be reviewed as suggested features | Conform; Suggest a Feature | 7/08/2015 |
| CADconform for MicroStation v8.00.10 | B-20152163 | Drag and drop from Explorer does not work correctly | Reporting | 5/08/2015 |
| CADconform for MicroStation v8.00.07 | B-20152159 | Conforming from the Error List report may conform all matching features | Reporting | 20/07/2015 |
| CADconform for MicroStation v8.00.07 | B-20152156 | Feature summary report may skip the first component error in orphan cells | Reporting | 16/07/2015 |
| CADconform for MicroStation v8.00.07 | B-20152158 | Brief & Full description columns may show the symbology keyin description | Reporting | 17/07/2015 |
| CADconform for MicroStation v8.00.07 | B-20152155 | Change All may produce an error with components of Orphan Cells | Conform; Reporting | 15/07/2015 |
| CADconform for MicroStation v8.00.07 | B-20152160 | Removing reported reference files may not handle nesting correctly | Reporting | 20/07/2015 |
| CADconform for MicroStation v8.00.06 | B-20152153 | Font numbers are checked even when the option is disabled | Watermarking | 10/07/2015 |
| CADconform for MicroStation v8.00.06 | B-20152154 | Normal cells may match 3D solids | Conform; Reporting | 13/07/2015 |
| CADconform for MicroStation v8.00.05 | B-20152151 | Elements outside the border are not reported correctly in the Detailed report | Reporting | 2/07/2015 |
| CADconform for MicroStation v8.00.05 | B-20152152 | Conform-by-Report does not handle multiple selections correctly | Reporting | 8/07/2015 |
| CADconform for MicroStation v8.00.04 | B-20152150 | Conform-by-draft returns an error message | Drafting Menu | 22/06/2015 |
| CADconform for MicroStation v8.00.03 | B-20152147 | Changing cells from the Report Viewer may not preserve custom scale | Reporting | 29/04/2015 |
| CADconform for MicroStation v8.00.03 | B-20152148 | Reopening Cell Selector after filtering with strings may crash | Cell Selector | 1/05/2015 |
| CADconform for MicroStation v8.00.02 | B-20152145 | Incorrect preview images are shown when cell caching is disabled | Cell Selector | 23/04/2015 |
| CADconform for MicroStation v8.00.02 | B-20152146 | Cell preview icons may show through dialog when switching modes in MS2004 | Cell Selector | 23/04/2015 |
| CADconform for MicroStation v8.00.01 | B-20152143 | Batch Reports dialog won't open in MS2004 due to missing icon | Reporting | 22/04/2015 |
| CADconform for MicroStation v8.00.01 | B-20152144 | The Drawing Scale popup item won't open in MS2004 | Conform | 22/04/2015 |
| CADconform for MicroStation v8.00.01 | B-20152142 | Text nodes with non-LT justification may move after conforming | Conform | 8/04/2015 |
| CADconform for MicroStation v8.00.01 | B-20152140 | Nested complex components may not conform from Report correctly | Conform; Reporting | 31/03/2015 |
| CADconform for MicroStation v8.00.01 | B-20152138 | ByLevel colours do not show the correct preview colour | HTML Reports | 27/03/2015 |
| CADconform for MicroStation v8.00.01 | B-20152139 | True RGB colours (>255) do not show the correct preview colour | HTML Reports | 27/03/2015 |
| CADconform for MicroStation v8.00.00 | B-20152137 | Text size that matches in range may not conform to proper value | Conform | 25/03/2015 |
| CADconform for MicroStation v7.01.75 | B-20142083 | Crash repairing diameter dimension in one dataset | Conform | 22/09/2014 |
| CADconform for MicroStation v7.01.74 | B-20142078 | The View Report feature selector filter does not re-initialise on startup | Reporting | 26/08/2014 |
| CADconform for MicroStation v7.01.73 | B-20142077 | Crash when loading an older v6 licence | Login | 25/08/2014 |
| CADconform for MicroStation v7.01.73 | B-20142076 | Models with no active view may produce erroneous reports | Batch Processor; Reporting; Watermarking | 22/08/2014 |
| CADconform for MicroStation v7.01.73 | B-20142075 | Models with very large level numbers may cause performance issues | Conform | 20/08/2014 |
| CADconform for MicroStation v7.01.72 | B-20142074 | Cell Selector overrides active scale with 1 if no scale set | Cell Selector | 10/07/2014 |
| CADconform for MicroStation v7.01.71 | B-20142067 | The default location for suggested features should not be 'Untitled Group' | Suggest a Feature | 19/06/2014 |
| CADconform for MicroStation v7.01.71 | B-20142066 | Reference file nesting may display in the wrong order | Reporting | 19/06/2014 |
| CADconform for MicroStation v7.01.70 | B-20142055 | Cell scale problems may display incorrect match score | Conform | 24/04/2014 |
| CADconform for MicroStation v7.01.70 | B-20142056 | Display of sizes may strip trailing zeroes before the decimal point | Conform | 24/04/2014 |
| CADconform for MicroStation v7.01.70 | B-20142058 | The drafting menu may not follow the mouse location correctly | Drafting Menu | 1/05/2014 |
| CADconform for MicroStation v7.01.70 | B-20142057 | Focusing into the keyin window modifies the feature table | Feature Table Editor | 1/05/2014 |
| CADconform for MicroStation v7.01.69 | B-20142054 | Occasional crash using Cell Selector when switching features | Cell Selector | 22/04/2014 |
| CADconform for MicroStation v7.01.69 | B-20142052 | The CADconform cell selector keyin may get set multiple times | Feature Table Editor | 11/04/2014 |
| CADconform for MicroStation v7.01.68 | B-20142053 | Crash due to missing function in V8i SelectSeries 2 | Drafting Menu | 17/04/2014 |
| CADconform for MicroStation v7.01.67 | B-20142048 | Cell selector may display wrong preview image when using string filter | Cell Selector | 18/03/2014 |
| CADconform for MicroStation v7.01.67 | B-20142049 | Conform may apply active scale twice when conforming by ranges | Conform | 19/03/2014 |
| CADconform for MicroStation v7.01.67 | B-20142045 | Potential crash when switching from a large cell library to a small one | Cell Selector | 11/03/2014 |
| CADconform for MicroStation v7.01.67 | B-20142046 | Cell previews now force display of construction lines, patterns, dimensions, etc | Cell Selector | 12/03/2014 |
| CADconform for MicroStation v7.01.66 | B-20142040 | Cell selector may leave docking handles on-screen after undocking | Cell Selector | 7/01/2014 |
| CADconform for MicroStation v7.01.66 | B-20142039 | Cell selector may not work if no feature has ever been activated | Cell Selector | 7/01/2014 |
| CADconform for MicroStation v7.01.64 | B-20132037 | Conform from report is not clearing the previous string on startup | Reporting | 3/12/2013 |
| CADconform for MicroStation v7.01.64 | B-20132035 | Text colour is no longer ignored when matching cell definitions | Conform | 14/11/2013 |
| CADconform for MicroStation v7.01.64 | B-20132034 | A patch install may not fetch the previous share path correctly | Installer | 7/11/2013 |
| CADconform for MicroStation v7.01.64 | B-20132036 | Conform is dropping inline superscript characters to normal script | Conform | 15/11/2013 |
| CADconform for MicroStation v7.01.60 | B-20132030 | Conformed text nodes may inherit the active symbology settings | Conform | 3/10/2013 |
| CADconform for MicroStation v7.01.60 | B-20132031 | Cell definition checking may fail due to mismatched linestyle case | Conform | 10/10/2013 |
| CADconform for MicroStation v7.01.60 | B-20132032 | Cell level checksumming may fail due to duplicate levels with differing IDs | Conform | 10/10/2013 |
| CADconform for MicroStation v7.01.60 | B-20132033 | Text rotation is set in degrees instead of radians | Conform | 13/10/2013 |
| CADconform for MicroStation v7.01.59 | B-20132028 | Cell selector was not expanding all wildcard paths correctly | Drafting Menu | 2/10/2013 |
| CADconform for MicroStation v7.01.59 | B-20132029 | Change All may fail on custom linestyle scales of zero | Conform | 2/10/2013 |
| CADconform for MicroStation v7.01.59 | B-20132027 | Check cell definition should ignore invisible text elements | Conform | 12/09/2013 |
| CADconform for MicroStation v7.01.58 | B-20132026 | Elements with no displayed tags may show a symbology error | Conform | 10/09/2013 |
| CADconform for MicroStation v7.01.57 | B-20132023 | Tag symbology scoring was not accurate | Conform | 4/09/2013 |
| CADconform for MicroStation v7.01.57 | B-20132022 | Fixing tag symbology of cells does not work | Conform | 4/09/2013 |
| CADconform for MicroStation v7.01.57 | B-20132025 | Tag symbology is no longer checked for undisplayed tags | Conform | 5/09/2013 |
| CADconform for MicroStation v7.01.57 | B-20132024 | Tag symbology checking assumed all tags had the same symbology | Conform | 4/09/2013 |
| CADconform for MicroStation v7.01.57 | B-20132021 | Commas in tag values may cause an erroneous value mismatch | Conform | 22/08/2013 |
| CADconform for MicroStation v7.01.56 | B-20132020 | Tag symbology checking may result in >100% feature match | Conform | 15/08/2013 |
| CADconform for MicroStation v7.01.54 | B-20132019 | Extension lines on/off does not work in German | Feature Table Editor | 13/06/2013 |
| CADconform for MicroStation v7.01.54 | B-20132018 | Blank level descriptions show as garbage in the level selector | Conform; Reporting | 7/06/2013 |
| CADconform for MicroStation v7.01.54 | B-20132017 | Tag definitions containing a comma are not supported | Feature Table Editor | 4/06/2013 |
| CADconform for MicroStation v7.01.52 Beta 4 | B-20132012 | Scan problems with reference elements outside the z-depth of the master model | Reporting; Watermarking | 7/03/2013 |
| CADconform for MicroStation v7.01.52 Beta 4 | B-20132013 | Zoom in Conform may not show all elements within the Z clipping range | Reporting; Watermarking | 8/03/2013 |
| CADconform for MicroStation v7.01.52 Beta 3 | B-20132010 | Possible internal string buffer overflow during unicode conversion | Conform; Reporting | 28/02/2013 |
| CADconform for MicroStation v7.01.52 Beta 3 | B-20132009 | Referenced rotated text may appear outside the border in MS2004 | Conform; Reporting | 27/02/2013 |
| CADconform for MicroStation v7.01.52 Beta 3 | B-20132008 | Nested cells with text may appear outside the border in MS2004 | Conform; Reporting | 27/02/2013 |
| CADconform for MicroStation v7.01.52 | B-20132014 | Certifying files with undisplayed refs may invalidate watermark on reopening | Watermarking | 18/03/2013 |
| CADconform for MicroStation v7.01.51 | B-20132005 | Empty custom linestyles in nested ref files may cause immediate invalidation | Watermarking | 29/01/2013 |
| CADconform for MicroStation v7.01.51 | B-20132007 | Reprojected ref files may invalidate due to dimension differences in SS2 vs SS3 | Watermarking | 29/01/2013 |
| CADconform for MicroStation v7.01.51 | B-20132004 | Cells in reprojected ref files may cause immediate invalidation | Watermarking | 29/01/2013 |
| CADconform for MicroStation v7.01.51 | B-20132006 | Reprojected ref files may invalidate due to text node line spacing | Watermarking | 29/01/2013 |
| CADconform for MicroStation v7.01.50 | B-20122002 | Dimensions with missing styles may crash Conform | Conform | 21/12/2012 |
| CADconform for MicroStation v7.01.49 | B-20122000 | Cut & Paste into a child of the selection will delete the whole selection | Feature Table Editor | 12/12/2012 |
| CADconform for MicroStation v7.01.49 | B-20122001 | Font name may not initialise correctly when activated | Feature Table Editor | 13/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121996 | 3D files may zoom with an incorrect clipping plane depth | Conform | 4/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121997 | Elements beyond the clipping plane may be reported as outside border | Reporting | 5/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121999 | Working units may not be calculated correctly for some models | Conform; Reporting | 10/12/2012 |
| CADconform for MicroStation v7.01.48 | B-20121998 | Older databases with numbered fonts may crash on import | Feature Table Mgr | 6/12/2012 |
| CADconform for MicroStation v7.01.47 | B-20121995 | Non-MS fonts may get remapped when moving between models | Conform | 7/11/2012 |
| CADconform for MicroStation v7.01.46 | B-20121993 | Cells with custom linestyles may not match cache definition | Conform; Reporting | 29/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121990 | Corrupt cells in MicroStation 2004 may report as outside the border | Reporting | 16/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121994 | Some dimension commands display 'command not defined' | Drafting Menu | 31/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121991 | Possible hang when deleting or dropping from Detailed Error report | Reporting | 16/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121992 | Dropped elements may not show a summary from the Detailed Error report | Reporting | 18/10/2012 |
| CADconform for MicroStation v7.01.46 | B-20121989 | Conform preview may not show text elements centred correctly | Conform | 5/10/2012 |
| CADconform for MicroStation v7.01.45 | B-20121986 | The command to set the active dimension text style was not working | Drafting Menu | 21/09/2012 |
| CADconform for MicroStation v7.01.45 | B-20121985 | Older dictionaries do not recognise 'None' as the same as 'Style (None)' | Conform; Feature Table Editor; Reporting | 19/09/2012 |
| CADconform for MicroStation v7.01.45 | B-20121987 | Small B-splines may not clip correctly in MicroStation 2004 | Reporting | 28/09/2012 |
| CADconform for MicroStation v7.01.45 | B-20121988 | Certify with fence warning persists after fence is cleared | Reporting; Watermarking | 1/10/2012 |
| CADconform for MicroStation v7.01.43 | B-20121983 | Crash on certification with a plot border shape defined | Watermarking | 12/09/2012 |
| CADconform for MicroStation v7.01.42 | B-20121977 | Placed notes may contain extension lines that cannot be fixed | Conform | 16/08/2012 |
| CADconform for MicroStation v7.01.42 | B-20121978 | Multi-string dimensions may not pick up overridden fonts | Conform | 16/08/2012 |
| CADconform for MicroStation v7.01.42 | B-20121980 | Empty text nodes may report as outside clipping border in V8i | Conform; Reporting | 20/08/2012 |
| CADconform for MicroStation v7.01.42 | B-20121982 | Reprojected references may cause text size to fail conformance | Reporting | 31/08/2012 |
| CADconform for MicroStation v7.01.42 | B-20121981 | Elements overlapping ref clip may report as outside plot border | Reporting | 29/08/2012 |
| CADconform for MicroStation v7.01.41 | B-20121972 | Multiline dimension font overriding is not detected in MS2004 | Conform; Reporting | 30/07/2012 |
| CADconform for MicroStation v7.01.41 | B-20121975 | Zoom may be inaccurate for shared cells in 3D files | Conform | 3/08/2012 |
| CADconform for MicroStation v7.01.41 | B-20121971 | Keyins are truncated at 1024 characters when drafting | Drafting Menu | 30/07/2012 |
| CADconform for MicroStation v7.01.41 | B-20121973 | Some complex headers may report as outside the border in MS2004 | Conform; Reporting | 30/07/2012 |
| CADconform for MicroStation v7.01.40 | B-20121909 | Draft-by-ranges was not setting symbology correctly for dimensions | Drafting Menu | 14/03/2012 |
| CADconform for MicroStation v7.01.40 | B-20121970 | Conform window has overlapping dialog items on clean install | Conform | 25/07/2012 |
| CADconform for MicroStation v7.01.40 | B-20121908 | AutoCAD reference files cause automatic invalidation of watermarks | Watermarking | 24/02/2012 |
| CADconform for MicroStation v7.01.40 | B-20121969 | Watermark invalidation on file open due to reprojected reference files | Watermarking | 25/07/2012 |
| CADconform for MicroStation v7.01.38 | B-20121964 | Placing a pattern cell should set the angle keyin as "PA" instead of "AA" | Drafting Menu; Feature Table Editor | 2/07/2012 |
| CADconform for MicroStation v7.01.38 | B-20121968 | Reference elements now obey clip masks prior to plot border checking | Reporting | 11/07/2012 |
| CADconform for MicroStation v7.01.38 | B-20121967 | B-splines and arcs may report as outside the border in MS2004 | Reporting | 11/07/2012 |
| CADconform for MicroStation v7.01.38 | B-20121966 | Missing title block errors may appear if the text overlaps the plot border | Conform; Reporting | 3/07/2012 |
| CADconform for MicroStation v7.01.38 | B-20121965 | There are no drafting commands for placing cells at X and Y axis angles | Drafting Menu | 2/07/2012 |
| CADconform for MicroStation v7.01.37 | B-20121960 | Suggested feature may not be accepted if the destination folder is not loaded | Suggest a Feature | 26/06/2012 |
| CADconform for MicroStation v7.01.37 | B-20121959 | Suggested features may place the sent message in the wrong sent folder | Suggest a Feature | 26/06/2012 |
| CADconform for MicroStation v7.01.37 | B-20121961 | Digital signatures do not inherit the settings from existing watermarks | Digital Signatures; Watermarking | 29/06/2012 |
| CADconform for MicroStation v7.01.37 | B-20121962 | New digital signatures could not be placed in MicroStation V8i | Digital Signatures | 29/06/2012 |
| CADconform for MicroStation v7.01.36 | B-20121958 | Change/Change All may show zero changed complex elements | Conform | 21/06/2012 |
| CADconform for MicroStation v7.01.36 | B-20121957 | Crash when conforming nested orphan cells in MicroStation 2004 | Conform | 21/06/2012 |
| CADconform for MicroStation v7.01.35 | B-20121956 | Text styles with overrides may produce 100% match score in Conform | Conform | 18/06/2012 |
| CADconform for MicroStation v7.01.34 | B-20121955 | Drafting may produce spurious error message | Drafting Menu | 14/06/2012 |
| CADconform for MicroStation v7.01.33 | B-20121951 | Possible crash in FTE if drop target matches same row as drag target | Feature Table Editor | 8/06/2012 |
| CADconform for MicroStation v7.01.33 | B-20121950 | The plot border cell is sometimes reported as being outside the plot border shape | Reporting | 8/06/2012 |
| CADconform for MicroStation v7.01.33 | B-20121952 | Text of zero size will zoom to (0,0) instead of correct text origin | Reporting | 12/06/2012 |
| CADconform for MicroStation v7.01.33 | B-20121953 | Text of zero size may be reported as outside border | Conform | 12/06/2012 |
| CADconform for MicroStation v7.01.31 | B-20121949 | Defining a pre-certification keyin may cause a hang until the user presses RESET | Reporting | 29/05/2012 |
| CADconform for MicroStation v7.01.30 | B-20121929 | Missing reference files may cause SQL error on some design file names | Reporting | 16/05/2012 |
| CADconform for MicroStation v7.01.30 | B-20121930 | Synchronising tables may crash for database columns over 260 characters | Feature Table Mgr | 16/05/2012 |
| CADconform for MicroStation v7.01.30 | B-20121928 | Possible hang when using Conform-to on the Error List report | Reporting | 15/05/2012 |
| CADconform for MicroStation v7.01.30 | B-20121927 | Conform by fence or border shape is not reliable in 3D files | Conform; Reporting | 4/05/2012 |
| CADconform for MicroStation v7.01.28 | B-20121923 | Possible hang when a cell library contains an underscore and cell cache is on | Conform | 26/04/2012 |
| CADconform for MicroStation v7.01.28 | B-20121924 | Possible crash in cell caching when CSF files are used with cell libraries | Conform | 26/04/2012 |
| CADconform for MicroStation v7.01.27 | B-20121922 | PowerDraft with UAC enabled may not be able to create local client paths | Configuration | 25/04/2012 |
| CADconform for MicroStation v7.01.27 | B-20121921 | Conform may change text node size when size is not defined in standards | Conform | 25/04/2012 |
| CADconform for MicroStation v7.01.27 | B-20121920 | Conform may crash on orphan cells with thousands of components | Conform | 23/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121915 | Some dimension types do not have their text size fixed | Conform | 4/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121912 | Setting the dimension font by name does not work in the Drafting Menu | Drafting Menu | 30/03/2012 |
| CADconform for MicroStation v7.01.26 | B-20121917 | Conform-to from Report Viewer may set text size incorrectly | Reporting | 5/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121918 | Changing client version sometimes failed to update local config file | Configuration | 5/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121916 | Text font is not applied in Conform-by-ranges | Conform | 5/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121913 | Report does not refresh drawing scale of master model on completion | Batch Processor; Reporting | 30/03/2012 |
| CADconform for MicroStation v7.01.26 | B-20121914 | Cell components should not be ignored if cells are not checked | Conform | 4/04/2012 |
| CADconform for MicroStation v7.01.26 | B-20121911 | Dimensions in reference files interpret the text size using the master UORs | Reporting | 28/03/2012 |
| CADconform for MicroStation v7.01.25 | B-20121910 | Preference file path may be clipped if server install path is too long | Configuration; Installer | 20/03/2012 |
| CADconform for MicroStation v7.01.24 | B-20121903 | Crash when conforming cells with some dimension types ignoring font numbers | Conform | 25/01/2012 |
| CADconform for MicroStation v7.01.24 | B-20121905 | CADconform hangs when invalidating legacy watermark | Watermarking | 7/02/2012 |
| CADconform for MicroStation v7.01.24 | B-20121906 | Draft-by-ranges does not update text colour in MicroStation V8i | Drafting Menu | 7/02/2012 |
| CADconform for MicroStation v7.01.24 | B-20121904 | MicroStation build does not allow more than 4 Data-Fields per cell | Feature Table Editor | 6/02/2012 |
| CADconform for MicroStation v7.01.23 | B-20111902 | Conform does not support cells with nested anonymous DWG shared cell components | Conform | 23/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111896 | Cell definition checking may be inconsistent with point cells | Conform | 13/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111897 | Cell scale lock is only allowed in 3D files when choosing replacement cell | Conform | 13/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111900 | Cancelling a batch report only cancels the current file operation | Reporting | 16/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111898 | Spurious unmatched cell name may appear due to find file error | Conform; Reporting | 15/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111901 | The report 'Conform To' tool does not support cell components | Reporting | 16/12/2011 |
| CADconform for MicroStation v7.01.22 | B-20111899 | Colour match scoring may crash if colour index is greater than 256 | Conform; Reporting | 15/12/2011 |
| CADconform for MicroStation v7.01.21 | B-20111895 | Conform-to may not work on elements not located in the active model | Reporting | 6/12/2011 |
| CADconform for MicroStation v7.01.20 | B-20111889 | Shape features do not allow 'Conform To' on linear features in Reports | Reporting | 11/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111874 | Conforming text may change the alignment settings unnecessarily | Conform | 14/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111890 | Spurious missing feature errors when reviewing suggested features | Conform | 17/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111891 | Multi-set symbology propagates the first level unnecessarily | Feature Table Editor | 18/11/2011 |
| CADconform for MicroStation v7.01.20 | B-20111892 | Network client install does not set correct CADconform share path | Installer | 18/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111882 | Dimensions may show as removed as soon as the preview is shown | Conform | 8/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111881 | Dimension text weight may not be changed successfully in Conform | Conform | 1/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111883 | Selecting text to conform to may change the active text-style | Conform | 3/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111893 | Long delay on opening CADconform or Conform when MS_CELLLIST is large | Conform | 21/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111885 | Dimensions may show as removed as soon as the 'Change' button is pressed | Conform | 8/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111880 | Dimension text-style may not be shown in Conform feature summary | Conform | 1/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111879 | Text-style mismatch may not be scored correctly in Conform | Conform | 31/10/2011 |
| CADconform for MicroStation v7.01.19 | B-20111878 | Text-styles may inherit the incorrect font if conformed to a DGNLIB text-style | Conform | 3/11/2011 |
| CADconform for MicroStation v7.01.19 | B-20111876 | Conforming cells may enable locked scale if drawing scale window is opened | Conform | 27/10/2011 |
| CADconform for MicroStation v7.01.19 | B-20111884 | Dimension annotation override cannot be disabled - partial fix | Conform | 7/11/2011 |
| CADconform for MicroStation v7.01.18 | B-20111855 | Draft-by-ranges may not show a custom linestyle ByLevel if it hasn't been placed | Conform; Drafting Menu | 14/09/2011 |
| CADconform for MicroStation v7.01.18 | B-20111863 | Deleting all rows makes the FTE not able to export until restarted | Feature Table Editor | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111865 | The Change Feature Table option does not allow rebranding of branded files | Conform; Drafting Menu | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111860 | String filter does not update feature list when resizing | Drafting Menu | 6/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111861 | Double-cross on report fail option always shows ON even when OFF | Preferences | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111862 | Report may produce spurious marker/watermark errors | Watermarking | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111858 | Drafting to 'dimension style: none' does not work | Drafting Menu | 5/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111859 | String filter does not clear when drafting menu is shrunk to hide it | Drafting Menu | 6/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111857 | Crash when exporting either CSV or TXT report but not both | Batch Processor | 5/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111875 | Drafting menu becomes unresponsive when the FTE window is closed | Drafting Menu; Feature Table Editor | 27/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111864 | Deleting all rows should be disabled if multiple tables are loaded | Feature Table Editor | 13/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20101692 | Rotated watermarks cause incorrect invalidation slash | Watermarking | 7/10/2011 |
| CADconform for MicroStation v7.01.18 | B-20111856 | HTML Report may not show colour ranges if the primary colour is ByLevel | HTML Reports | 15/09/2011 |
| CADconform for MicroStation v7.01.17 | B-20111851 | DWG Hatching may make cell definition checking fail | Conform | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111850 | Cells containing nested shared cells may not pass cell definition checking | Conform | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111849 | 3D cells may not match on definition when cell cache is enabled | Conform | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111848 | Changing the level or linestyle toggles may cause a crash | Feature Table Editor | 25/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111854 | Symbology ranges show active ByLevel settings, not the current feature level | Feature Table Editor | 30/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111853 | Choose cell dialog may pop up unexpectedly during Conforming | Conform | 30/08/2011 |
| CADconform for MicroStation v7.01.17 | B-20111852 | Possible crash when switching branded DGNs with drafting menu open | Drafting Menu | 25/08/2011 |
| CADconform for MicroStation v7.01.16 | B-20111846 | Background batch processing clears the current user's password | Batch Processor | 15/08/2011 |
| CADconform for MicroStation v7.01.16 | B-20111847 | Replacing dimensions may reset the master/sub unit overrides | Conform | 23/08/2011 |
| CADconform for MicroStation v7.01.15 | B-20111844 | Conform cannot fix a colour table if the capability is disabled by the workspace | Conform | 10/08/2011 |
| CADconform for MicroStation v7.01.15 | B-20111845 | Colour table remapping was not using the correct values for the new table | Conform | 10/08/2011 |
| CADconform for MicroStation v7.01.14 | B-20111834 | Cannot apply new dimension style to previous unnamed dimension style | Conform | 28/07/2011 |
| CADconform for MicroStation v7.01.14 | B-20111843 | Dimension font colour may not conform correctly for named dimension styles | Conform | 28/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111837 | Cached cells may repopulate for every conform operation | Conform | 11/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111840 | Possible crash with many branded tables in one design file | Feature Table Mgr | 13/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111841 | Possible crash when checking dimensions with zero stack offset | Conform; Reporting | 26/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111842 | Automatic copying of Data Fields may replace text contents unnecessarily | Conform; Reporting | 26/07/2011 |
| CADconform for MicroStation v7.01.13 | B-20111838 | Cached cells may not be found when wildcards are used in MS_CELLLIST | Conform | 11/07/2011 |
| CADconform for MicroStation v7.01.12 | B-20111836 | Don't check design file name for self-attached reference files | Reporting | 4/07/2011 |
| CADconform for MicroStation v7.01.12 | B-20111830 | ByLevel values may result in a match score above 100% | Conform | 8/06/2011 |
| CADconform for MicroStation v7.01.12 | B-20111833 | Dimensions with no text may cause a crash when checking | Conform | 1/07/2011 |
| CADconform for MicroStation v7.01.12 | B-20111835 | Reporting within a fence should disable the check inside plot boundary | Reporting | 4/07/2011 |
| CADconform for MicroStation v7.01.11 | B-20111832 | Scan for elements outside border does not obey ref file clipping | Reporting | 28/06/2011 |
| CADconform for MicroStation v7.01.11 | B-20111828 | CADconform may not display all icons if updated from the server automatically | Tool Palettes | 25/05/2011 |
| CADconform for MicroStation v7.01.11 | B-20111829 | Cached cell files containing text require deletion to conform properly | Conform | 25/05/2011 |
| CADconform for MicroStation v7.01.10 | B-20111827 | Conform preview may not show text with missing font correctly | Conform | 10/05/2011 |
| CADconform for MicroStation v7.01.10 | B-20111826 | Conform preview may not show element with zero width or height | Conform | 10/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111824 | Adding a suggested feature may cause a crash | Conform | 6/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111822 | Setting the active text slant in V8i was overriding other text settings | Drafting Menu | 5/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111825 | Branded disallowed tables do not always display as an error | Branding; Feature Table Mgr | 9/05/2011 |
| CADconform for MicroStation v7.01.07 | B-20111823 | Checking cell score may create endless loop in Conform | Conform | 6/05/2011 |
| CADconform for MicroStation v7.01.06 | B-20111817 | Some watermark cells may cause immediate invalidation | Watermarking | 19/04/2011 |
| CADconform for MicroStation v7.01.06 | B-20111818 | Dimension line symbology may report as incorrect | Conform | 20/04/2011 |
| CADconform for MicroStation v7.01.06 | B-20111819 | Copy/paste may reverse order of features | Feature Table Editor | 20/04/2011 |
| CADconform for MicroStation v7.01.06 | B-20111820 | Conform hide button may hide all elements for numeric named levels | Conform | 21/04/2011 |
| CADconform for MicroStation v7.01.05 | B-20111791 | Possible crash when reading dimensions with a missing font | Conform | 11/04/2011 |
| CADconform for MicroStation v7.01.05 | B-20111788 | Cache files may refuse to load for feature tables with 26 entries | Databases | 21/03/2011 |
| CADconform for MicroStation v7.01.05 | B-20111790 | CADconform update may not write out local config file properly | Configuration | 5/04/2011 |
| CADconform for MicroStation v7.01.05 | B-20111789 | Possible crash when conforming text with a missing font | Conform | 22/03/2011 |
| CADconform for MicroStation v7.01.04 | B-20111786 | Correct cell name is not selected when the cell selector dialog is opened | Conform | 14/03/2011 |
| CADconform for MicroStation v7.01.04 | B-20111787 | Possible crash on conforming of text with size ranges | Conform | 14/03/2011 |
| CADconform for MicroStation v7.01.04 | B-20111781 | Crash when synchronising an external SQL Server database | Databases | 9/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111784 | Resizing of group-boxes does not repaint the screen properly | Preferences | 15/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111780 | Settings will not be saved if a previous save file is not found | Other | 9/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111779 | Conform preview does not show details for zero sized elements | Conform | 1/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111783 | Text colour may not be set correctly | Conform | 15/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111777 | The cell library path may be clipped if a matching file exists in the MS_CELL path | Feature Table Editor; User Manager | 31/01/2011 |
| CADconform for MicroStation v7.01.04 | B-20111778 | Colour table prompt appears when colour table can't be fixed (e.g. DWG mode) | Conform | 1/02/2011 |
| CADconform for MicroStation v7.01.04 | B-20111776 | Watermark text substitution may sometimes fail | Watermarking | 29/01/2011 |
| CADconform for MicroStation v7.01.03 | B-20111774 | Removing watermarks may still trigger a watermark invalidation warning | Watermarking | 28/01/2011 |
| CADconform for MicroStation v7.01.03 | B-20111775 | Possible crash when watermarking with substituted watermark text | Watermarking | 28/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111773 | Dimension text size may be erroneously matched with '1.0' size | Conform | 25/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111772 | Improved granularity of match scoring of text and cell scales | Conform | 25/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111769 | Conform-by-ranges dialog may cause crash if no dimension styles defined | Conform | 10/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111768 | Crash when switching models and fixing colour tables | Conform | 10/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111771 | Conform may crash when checking an activated reference file | Conform | 20/01/2011 |
| CADconform for MicroStation v7.01.02 | B-20111770 | Dimensions with edited and overridden text settings may not be detected | Conform | 27/01/2011 |
| CADconform for MicroStation v7.01.01 | B-20101761 | The option to disallow user defined drawing scales does not work | Conform | 13/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101765 | Potential crash in the login dialog when user groups are not defined | Login | 17/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101757 | Batch processing of branded DGNs may produce database warning | Batch Processor | 9/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101758 | Restarting Conform may prompt for 'Next' unnecessarily | Conform | 10/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101763 | Windows authentication failure may prevent group login from succeeding | Login | 16/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101759 | Conforming a text node with no text height set may cause a crash | Conform | 10/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101766 | Branding should not switch tables when the FTE is open | Branding; Feature Table Editor | 29/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101756 | Conforming colour tables in sheet models may not fix background colour | Conform | 9/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101755 | Crash when saving DWG to DGN with incorrect colour tables | Conform | 8/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101754 | Colour table prompts may reappear multiple times when a read-only file is opened | Conform | 8/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101762 | Tool boxes may open the first time with zero width/height | Tool Palettes | 17/12/2010 |
| CADconform for MicroStation v7.01.01 | B-20101767 | Dimensions with 'no style' defined cannot be conformed | Conform | 28/12/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101748 | Switching branded DGNs in the report viewer may produce report warning | Reporting | 26/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101745 | Auto-start option may not work | Configuration | 24/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101747 | Text output from reports produces spurious error when no output path defined | Reporting | 25/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101746 | The Batch Unbranding command does not work | Branding | 24/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101742 | The feature filter may not show used features that are not level-checked | Drafting Menu | 15/11/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101713 | Conform match scoring does not sort single digits below double digits | Conform | 5/10/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101752 | Show used features will show features nested in cells | Drafting Menu | 2/12/2010 |
| CADconform for MicroStation v7.01.00-B2 | B-20101712 | CSV import does not support element types ranges without square brackets | Feature Table Editor | 27/09/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101701 | Replacing a cell may make hidden levels visible | Conform | 16/08/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101702 | Text size may change on Conform when size is not specified | Conform | 17/08/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101690 | Importing tables from DICT file showed double the number of features | Feature Table Mgr | 28/07/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101691 | B-spline knots may appear to be on the wrong level in a cell | Conform | 29/07/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101693 | Branded design files may prompt for the tables unnecessarily | Branding | 30/07/2010 |
| CADconform for MicroStation v7.01.00-B1 | B-20101694 | Tables that are not allowed are hidden from administrators if branding is present | Branding; Configuration | 30/07/2010 |
| CADconform for MicroStation v7.01.00 | B-20101753 | Conform dialog resizes incorrectly in XM with >= 12 pt font | Conform | 3/12/2010 |
| CADconform for MicroStation v7.01.00 | B-20101751 | Showing used features may ignore some cells | Drafting Menu | 1/12/2010 |
| CADconform for MicroStation v7.00.27 | B-20101749 | Draft menu may show uninitialised feature names | Drafting Menu | 26/11/2010 |
| CADconform for MicroStation v7.00.27 | B-20101750 | Visual Studio 2003 runtime must be installed or CADconform will not load | Configuration | 30/11/2010 |
| CADconform for MicroStation v7.00.27 | B-20101743 | Crash when opening Draft on startup with a branded model | Drafting Menu | 18/11/2010 |
| CADconform for MicroStation v7.00.26 | B-20101740 | Scanning certain levels does not always work reliably | Conform; Reporting | 8/11/2010 |
| CADconform for MicroStation v7.00.26 | B-20101741 | MicroStation may hang on first loading of CADconform | Configuration | 9/11/2010 |
| CADconform for MicroStation v7.00.25 | B-20091488 | HTML Report has the page title set to 'DGNconform' | HTML Reports | 5/01/2011 |
| CADconform for MicroStation v7.00.25 | B-20101737 | HTML report does not work on newer table formats | HTML Reports | 5/11/2010 |
| CADconform for MicroStation v7.00.25 | B-20101738 | Text nodes may get dropped to text elements in V8i during conforming | Conform | 5/11/2010 |
| CADconform for MicroStation v7.00.24 | B-20101735 | Conforming text nodes may not fix the line-spacing | Conform | 26/10/2010 |
| CADconform for MicroStation v7.00.24 | B-20101736 | Conforming text nodes may crash on text longer than 256 characters | Conform | 26/10/2010 |
| CADconform for MicroStation v7.00.23 | B-20101730 | ByLevel weight is not set correctly in German | Drafting Menu | 19/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101716 | Batch reporting API may crash when using wildcards in design file names | API | 11/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101717 | Placing a text-style the first time in V8i may not get set correctly | Drafting Menu | 12/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101718 | Tags attached to excluded cells were not ignored for watermarking | Watermarking | 13/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101719 | Feature table may load twice after suggesting a feature | Conform | 14/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101720 | Sometimes reviewing added features shows no tables loaded | Conform | 14/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101729 | Sometimes reviewing added features showed an empty duplicate table | Conform | 14/10/2010 |
| CADconform for MicroStation v7.00.22 | B-20101715 | Cancelling the choose cell option causes the full path of the library to display | Feature Table Editor | 5/10/2010 |
| CADconform for MicroStation v7.00.21 | B-20101709 | Evaluation licence files are only accepted if entered manually | Licensing | 17/09/2010 |
| CADconform for MicroStation v7.00.21 | B-20101710 | Warnings appear when opening a dimension in the Feature Table Editor | Feature Table Editor | 17/09/2010 |
| CADconform for MicroStation v7.00.20 | B-20101684 | Drafted commands send an unnecessary null keyin to macros | Drafting Menu | 2/07/2010 |
| CADconform for MicroStation v7.00.20 | B-20101688 | Matching of border sheets fails after the first entry with no file name | Drawing Scale | 14/07/2010 |
| CADconform for MicroStation v7.00.20 | B-20101700 | Crash when attempting to fix text node with one specific design file | Conform | 16/08/2010 |
| CADconform for MicroStation v7.00.20 | B-20101708 | The 'force colour override' option for text-styles did not support ByLevel | Drafting Menu | 15/09/2010 |
| CADconform for MicroStation v7.00.20 | B-20101707 | Drafting text-styles does not work in XM | Drafting Menu | 15/09/2010 |
| CADconform for MicroStation v7.00.19 | B-20101704 | The report database defaults to match the feature database | Reporting | 14/09/2010 |
| CADconform for MicroStation v7.00.19 | B-20101706 | Appending existing reports produces a scale SQL error | Reporting | 14/09/2010 |
| CADconform for MicroStation v7.00.19 | B-20101705 | Cache files may produce tamper warning | Feature Table Mgr | 14/09/2010 |
| CADconform for MicroStation v7.00.18 | B-20101703 | Intermittent crash or hang after successful login | Login | 9/09/2010 |
| CADconform for MicroStation v7.00.16 | B-20101683 | Fixed database problem with missing spaces in PowerDraft | Databases | 30/06/2010 |
| CADconform for MicroStation v7.00.15 | B-20101677 | Crash when running report with multiple design files and models | Reporting | 30/05/2010 |
| CADconform for MicroStation v7.00.15 | B-20101678 | Possible Database exception when reporting | Reporting | 30/05/2010 |
| CADconform for MicroStation v7.00.15 | B-20101676 | The debug log may cause a crash in non-PowerDraft builds during reports | Reporting | 30/05/2010 |
| CADconform for MicroStation v7.00.14 | B-20101669 | Reporting incorrectly guesses the Default model as the last active model | Reporting; Watermarking | 17/05/2010 |
| CADconform for MicroStation v7.00.13 | B-20101674 | Drawing scale error reports incorrect design file | Reporting | 18/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101668 | Raster frame warning may appear multiple times in a batch certify | Watermarking | 17/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101671 | User password files are written out incorrectly | User Manager | 13/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101670 | Text styles with spaces in the name do not draft in V8i | Drafting Menu | 13/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101673 | Marker cells were not writing attributes correctly | Watermarking | 14/05/2010 |
| CADconform for MicroStation v7.00.12 | B-20101667 | Changing text style range cancels conform-by-select tool | Drafting Menu | 12/05/2010 |
| CADconform for MicroStation v7.00.11 | B-20101666 | Replacing dimension styles may fail in V8i | Conform | 4/05/2010 |
| CADconform for MicroStation v7.00.11 | B-20101664 | Crash when changing dimension styles in FTE | Feature Table Editor | 29/04/2010 |
| CADconform for MicroStation v7.00.11 | B-20101665 | Conform may prompt to save changes to Feature Tables unnecessarily | Conform; Feature Table Editor | 29/04/2010 |
| CADconform for MicroStation v7.00.11 | B-20101662 | The set text colour command does not work in V8i | Drafting Menu | 26/04/2010 |
| CADconform for MicroStation v7.00.07 | B-20101661 | Remapping the colour table may crash with BYLEVEL colours | Other | 20/04/2010 |
| CADconform for MicroStation v7.00.07 | B-20101660 | Hide feature in view does not work in MicroStation V8i | Other | 13/04/2010 |
| CADconform for MicroStation v7.00.06 | B-20101659 | Crash in Conform-By-Ranges in V8i when active level is in a DGNLIB file | Drafting Menu | 11/09/2009 |
| CADconform for MicroStation v7.00.06 | B-20101657 | Dimension text left margin may not conform correctly | Conform | 1/04/2010 |
| CADconform for MicroStation v7.00.06 | B-20101656 | Dimension text colour may report as wrong for some dimensions | Conform | 1/04/2010 |
| CADconform for MicroStation v7.00.06 | B-20101655 | Conform cell replacement failed on 2D cells in 3D files. | Conform | 28/03/2010 |
| CADconform for MicroStation v7.00.05 | B-20101650 | Patching to a new version does not remove the local config file | Installer | 15/03/2010 |
| CADconform for MicroStation v7.00.05 | B-20101651 | CADconform matches SHX fonts before TT or RSC fonts with the same name | Conform | 18/03/2010 |
| CADconform for MicroStation v7.00.04 | B-20101648 | Dimension style overrides may require multiple Conform passes to fix | Conform | 8/03/2010 |
| CADconform for MicroStation v7.00.03 | B-20101633 | Cancelling export of feature table changes can mess up the Drafting Menu | Feature Table Editor | 15/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101638 | Drafting a level with a numbered name does not work | Drafting Menu | 24/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101637 | Macro in reporting database not set up to work with new Reports_Table structure | Databases | 18/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101634 | MicroStation 2004 may not set draft-by-ranges to ByLevel | Drafting Menu; Feature Table Mgr | 18/02/2010 |
| CADconform for MicroStation v7.00.03 | B-20101636 | Draft By Ranges Dialog: ByLevel text cut off | Drafting Menu | 24/02/2010 |
| CADconform for MicroStation v7.00.02 | B-20101627 | Text slant is set incorrectly in MicroStation V8i | Bilingual Text Tool; Reporting | 1/02/2010 |
| CADconform for MicroStation v7.00.02 | B-20101626 | Working unit labels in Design File report may be incorrect | Reporting | 1/02/2010 |
| CADconform for MicroStation v7.00.01 | B-20101625 | European characters are not supported in some dialogs | Conform | 29/01/2010 |
| CADconform for MicroStation v7.00.00-B3 | B-20101649 | Extension line symbology cannot be fixed if lines are disabled | Conform | 13/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091571 | Cached dictionaries propagate multiple apostrophes in keyin commands | Feature Table Editor | 1/12/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091564 | Dimension checking inconsistent between MS2004 and V8i | Conform; Reporting | 20/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091567 | Cell definition checking inconsistent between MS2004 and V8i | Conform; Reporting | 20/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091575 | Watermarks report as invalidated at Jan 1st 1970 in read-only designs | Watermarking | 7/12/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091561 | Upgrading old CADconform to v7 may produce file copy warning | Configuration | 12/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091562 | Exporting of database only occurs if something has been modified | Databases | 13/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091560 | Skipping deleted elements may be very slow in V8i | Conform | 10/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091563 | Extension line settings are no longer checked if extensions are disabled | Conform; Reporting | 13/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091559 | Reading of text styles may cause a crash in V8i | Conform | 10/11/2009 |
| CADconform for MicroStation v7.00.00-B3 | B-20091570 | Cell selector background colour is incorrect for sheet models in MS2004 | Drafting Menu | 30/11/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091550 | Tables with exactly 25 characters should not be allowed | Feature Table Mgr | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091558 | The network configuration file needs to be renamed without spaces | Configuration | 2/11/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091557 | Deleting a report may corrupt the reports table list | Reporting | 29/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091556 | Zoom-in may fail if the view window is inside-out | Conform | 28/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091551 | Dimension style ranges are not found in MicroStation V8i | Feature Table Mgr | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091548 | Can not create new user or group | User Manager | 6/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091569 | Changing the dimension font in the FTE may not work | Feature Table Editor | 21/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091553 | Multiscale rounds off values to 0.001. | Drawing Scale | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091549 | Viewing user messages causes MicroStation V8i to crash | Messaging | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091552 | Viewing file history may cause MicroStation V8i to crash | File History | 7/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091555 | Conform by clipping shape fails | Conform | 26/10/2009 |
| CADconform for MicroStation v7.00.00-B2 | B-20091554 | Dimension linestyle BYLEVEL may not match in Conform | Conform | 19/10/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091499 | 'Append' privilege also requires 'Edit' privilege | Conform | 4/09/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091539 | Text colour may not always be set correctly in WYSIWYG dialog | Drafting Menu | 23/09/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091530 | Computer names over 15 characters are not supported | Licensing | 21/08/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091532 | Reference file modifications may report as belonging to master model | Watermarking | 21/08/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091533 | Reference file modifications are not counted properly | Watermarking | 21/08/2009 |
| CADconform for MicroStation v7.00.00-B1 | B-20091529 | Dimension discrepancy between Conform and Report matching | Conform; Reporting | 14/08/2009 |
| CADconform for MicroStation v7.00.00 | B-20091579 | Warning on table open when fonts don't match due to case | Feature Table Editor | 18/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091578 | Non-model shared cell instances appear as errors in a DGN | Conform | 17/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091583 | TriCAD feature tables may export as invalid dictionaries | Feature Table Editor | 23/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091585 | Placing text with linespacing defined causes drafted text to reset to size of 1.0 | Drafting Menu | 23/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091582 | Possible crash in MicroStation V8i on startup with defined border sheets | Drawing Scale | 22/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091576 | Dimension extension line setting is not saving correctly | Feature Table Editor | 10/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091580 | Branded files may show the FTM dialog unnecessarily at startup | Branding | 21/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091577 | Import dictionary results in tamper warning | Feature Table Editor | 11/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20091581 | Database driver may crash XM after failing to find DSN file | Databases | 21/12/2009 |
| CADconform for MicroStation v7.00.00 | B-20101589 | Cell library path is clipped when the library is in the current directory | Feature Table Editor | 14/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20101590 | Server install does not create network confioguration files | Installer | 15/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20101588 | Crash in V8i when using the Batch API | Batch Processor | 5/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20061028 | Tagged library cells do not Conform with 'Check Cell Definition' ON | Conform | 15/01/2010 |
| CADconform for MicroStation v7.00.00 | B-20091584 | Linespacing type keyin is garbled in DLL compile | Feature Table Editor | 23/12/2009 |